sys log-config filter

sys log-config filter(1)      BIG-IP TMSH Manual      sys log-config filter(1)



NAME
       filter - Configures the filter component which filters out log messages
       for distribution by the publisher component.

MODULE
       sys log-config

SYNTAX
       Configure the filter component within the sys log-config module using
       the syntax shown in the following sections.

   CREATE/MODIFY
	create filter [name]
	modify filter [name]
	 options:
	  all
	  app-service [[string] | none]
	  description [string]
	  level       [ alert | crit | debug | emerg | err | info | notice | warn ]
	  message-id  [ 8 digit hex number | none ]
	  publisher   [[string] | none]
	  source      [ accesscontrol | accessperrequest | adapt | alertd | all | apmacl | arp | avr |
			based | bcm56xxd | big3d | big3dshim | bigd | bigdb | bigdbd | bigpipe |
			bigstart | bp | checkcert | chmand | cifs | clusterd | coapi | common |
			common-f5logging | common-fpdd | config-db | connapi | cs |  cssd | csyncd |
			daemon | deflate | devmgmtd | diameter | dmon | dosprotect | dummy | dwbld |
			eca | em-admin | em-alert | em-clientlib | em-common | em-device | em-discovery |
			em-file | em-lib | em-report | em-stats | em-swim | errdefsd | eventd | evrouted |
			fflag | fips | firewall-FQDN | firewall-nat | fix | get-dossier | gtmd | gtp |
			guestagentd | ha | ha-table | halmsg | hclientd | hornet-lib | hornet-nest |
			hornet-nest-flow-manager | hornet-nest-updater | hornet-neuron-updater | hornet-server |
			hornet-text-client | hostagentd | http | hwctl | hwpd |
			icrd | ip | ipfix | ipfix-proxy | ipfixirules | iprepd | ipsec | isession | istatsd |
			ivs | lacpd | layer4 | libhal | lind | lldpd | lopd | lsn | lsnapi | mamidbridged |
			map | mapi | mcp | mcpd | mdm | mgmt-acld | mr | mrsip | msgbusd | mysqlhad | net |
			network | no-source | packet-filter | pccd | pcp | pem | pfmand | pgadmind |
			pkcs11d | pktclass | plugin | policy | portal-access | pptp | probe-plusplus |
			promptstatusd | pva | pvad | radius | ramcache | rba | rewrite | rtsp | rules |
			saspd | scim | scriptd | sctp | sdmd | sflow | shell | shmmapd | snmp | sod |
			spolicy | ssl | sso | stated | statsd | statusd | stpd | subagents | swg |
			syscall | system-check | tamd | tcl-checker | tcpdump | tftp | tmm | tmm-tcp |
			tmrouted | tmsh | ts | tunnel | urlc | urldb | urldbmgrd | vcmpd | vdi | vxland |
			websso | woc-plugin | wr-urldbd | xconfig | xdb | zfd | zxfrd | gpa | cryptod | icr-eventd ]

   DISPLAY
	list filter
	list filter [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    all-properties
	    non-default-properties
	    one-line

   DELETE
	delete filter [name]

DESCRIPTION
       You can use the filter component to configure the filters for the
       common logging interface.

EXAMPLES
       create filter my_filter publisher my_pub

       Creates a filter named my_filter with the publisher my_pub.

       delete filter my_filter

       Deletes the filter named my_filter.

       list filter my_filter

       Displays properties of the filter named my_filter.

OPTIONS
       all  Specifies that you want to modify all of the existing components
	    of the specified type.

       app-service
	    Specifies the name of the application service to which the filter
	    belongs.  The default value is none. Note: If the strict-updates
	    option is enabled on the application service that owns the object,
	    you cannot modify or delete the filter. Only the application
	    service can modify or delete the filter.

       description
	    User defined description.

       glob Displays the items that match the glob expression. See help glob
	    for a description of glob expression syntax.

       level
	    The minimum severity level of logs to be filtered. The severity
	    levels in increasing order are debug, info, notice, warn, err,
	    crit, alert, and emerg.  The default value is debug.

       message-id
	    A refinement for filtering out specific logs. The default value is
	    none.  This is an eight digit hex number. The proper hex value can
	    be obtained from an existing log message by extracting the eight
	    digit value.

	    For example, the message-id for the example log message below is
	    highlighted.

	    Oct  9 15:38:20 bigip1 notice mcpd[21498]: 01070410:5: Removed
	    subscription with subscriber id logstatd

       name Specifies a unique name for the component. This option is required
	    for the commands create, delete, and modify.

       publisher
	    A publisher to send filtered log messages. The default value is
	    none.

       regex
	    Displays the items that match the regular expression. The regular
	    expression must be preceded by an at sign (@[regular expression])
	    to indicate that the identifier is a regular expression. See help
	    regex for a description of regular expression syntax.

       source
	    The stream of log messages that will be filtered by the
	    created/modified filter. The default value is all.

SEE ALSO
       create, delete, glob, list, modify, regex, tmsh

COPYRIGHT
       No part of this program may be reproduced or transmitted in any form or
       by any means, electronic or mechanical, including photocopying,
       recording, or information storage and retrieval systems, for any
       purpose other than the purchaser's personal use, without the express
       written permission of F5 Networks, Inc.

       F5 Networks and BIG-IP (c) Copyright 2008, 2012-2013, 2015. All rights
       reserved.



BIG-IP				  2016-08-31	      sys log-config filter(1)