sys management-ovsdb
sys management-ovsdb(1) BIG-IP TMSH Manual sys management-ovsdb(1)
NAME
management-ovsdb - Configures the OVSDB server.
MODULE
sys
SYNTAX
Configure the management-ovsdb component within the sys module using
the syntax in the following sections.
MODIFY
modify management-ovsdb
options:
ca-cert-file [filename]
cert-file [filename]
cert-key-file [filename]
controller-addresses [IP address(es)]
description [string]
disabled
enabled
flooding-type [multipoint | replicator]
log-level [level]
logical-routing-type [none | backhaul]
port [port number]
tunnel-floating-addresses [IP address(es)]
tunnel-local-address [IP address]
tunnel-maintenance-mode [active | passive]
DISPLAY
list management-ovsdb
show running-config management-ovsdb
options:
all-properties
one-line
ca-cert-file
cert-file
cert-key-file
controller-addresses
description
disabled
enabled
flooding-type
log-level
logical-routing-type
port
tunnel-floating-addresses
tunnel-local-address
tunnel-maintenance-mode
DESCRIPTION
Specifies the configurations for the OVSDB server.
EXAMPLES
modify management-ovsdb controller-addresses add { 10.0.0.1 }
Specifies 10.0.0.1 as the controller address.
list management-ovsdb all-properties
Displays the OVSDB server configurations.
OPTIONS
ca-cert-file
Specifies the name of the CA certificate file.
cert-file
Specifies the name of the certificate file.
cert-key-file
Specifies the name of the certificate key file.
controller-addresses
Specifies the IP address(es) of the controller.
disabled
Disables OVSDB management.
enabled
Enables OVSDB management.
flooding-type
Specifies the flooding type to use to transmit unknown destination
frames.
log-level
Specifies the log level for OVSDB management. The log file is
located at /var/tmp/vxland.out.
logical-routing-type
Specifies the logical routing type.
port Specifies the OVSDB connection port. The default port is 6640.
tunnel-floating-addresses
Specifies the floating endpoint address(es) for the tunnels. The
addresses need to be a self IP address associated with a floating
traffic-group.
tunnel-local-address
Specifies the local endpoint address for the tunnels created by
the controller. A valid IP address for the tunnel local endpoint
is required when OVSDB management is enabled.
tunnel-maintenance-mode
Specifies whether the tunnels are created automatically (active)
or manually (passive).
description
User defined description.
SEE ALSO
list, modify, save, show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or
by any means, electronic or mechanical, including photocopying,
recording, or information storage and retrieval systems, for any
purpose other than the purchaser's personal use, without the express
written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2013-2015. All rights reserved.
BIG-IP 2016-05-04 sys management-ovsdb(1)