sys raid bay

sys raid bay(1) 	      BIG-IP TMSH Manual	       sys raid bay(1)



NAME
       bay - Manages a BIG-IP(r) system disk drive bay.

MODULE
       sys raid

SYNTAX
       Manage the bay component within the sys raid module using the syntax in
       the following sections.

   MODIFY
	modify bay [1 | 2]
	  options:
	    flash-led
	    no-flash-led

   DISPLAY
	show bay [1 | 2]
	  options:
	    field-fmt

DESCRIPTION
       You can use the bay component to display information about a system
       bay, signal the LED on a bay to flash, or signal the LED on a bay to
       stop flashing.  The LED is helpful for identifying the location of a
       specific disk, see sys raid disk.

EXAMPLES
       modify bay 1 flash-led

       Signal the system to make the LED on bay 1 flash.

       show bay

       Displays information about the system bay.

       show bay field-fmt

       Displays information about the system bay in a field format.

OPTIONS
       flash-led
	    Signal the LED on the bay to flash.

       no-flash-led
	    Signal the LED on the bay to stop flashing.

       For information about the field-fmt option, see help show.

SEE ALSO
       show, sys raid disk, tmsh

COPYRIGHT
       No part of this program may be reproduced or transmitted in any form or
       by any means, electronic or mechanical, including photocopying,
       recording, or information storage and retrieval systems, for any
       purpose other than the purchaser's personal use, without the express
       written permission of F5 Networks, Inc.

       F5 Networks and BIG-IP (c) Copyright 2009-2010. All rights reserved.



BIG-IP				  2011-08-29		       sys raid bay(1)