apm resource ipv6-leasepool
apm resource ipv6-leasepool(1)BIG-IP TMSH Manualapm resource ipv6-leasepool(1)
NAME
ipv6-leasepool - Configures a lease pool.
MODULE
apm resource
SYNTAX
Configure the ipv6-leasepool component within the resource module using
the syntax shown in the following sections.
CREATE/MODIFY
create ipv6-leasepool [name]
modify ipv6-leasepool [name]
options
app-service [[string] | none]
description [[string] | none]
location-specific [true | false]
members [add | delete | modify | replace-all-with] {
[[first ip address in range] - [last ip address in range]]
}
DISPLAY
list ipv6-leasepool
list ipv6-leasepool [ [ [name] | [glob] | [regex] ] ... ]
show running-config ipv6-leasepool
show running-config ipv6-leasepool [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
one-line
partition
show ipv6-leasepool
show ipv6-leasepool [name]
DELETE
delete ipv6-leasepool [name]
DESCRIPTION
Configures an IPv6 lease pool to create a collection of IPv6 addresses
grouped as a single object. You can use a lease pool to associate that
collection of IP addresses with a network access resource.
EXAMPLES
create ipv6-leasepool myipv6-leasepool {fd1f::1-fd1f::64}
Creates a ipv6-leasepool named myipv6-leasepool that contains the
IPv6 addresses in the range fd1f::1 - fd1f::64.
Note: No spaces are allowed between the first IPv6 address,
hyphen, and second IPv6 address.
OPTIONS
app-service
Specifies the name of the application service to which the object
belongs. The default value is none. Note: If the strict-updates
option is enabled on the application service that owns the object,
you cannot modify or delete the object. Only the application
service can modify or delete the object.
description
Specifies a unique description of the lease pool.
location-specific
Specifies whether or not this object contains one or more
attributes with values that are specific to the location where the
BIG-IP device resides. The location-specific attribute is either
true or false. When using policy sync, mark an object as location-
specific to prevent errors that can occur when policies reference
objects, such as authentication servers, that are specific to a
certain location.
[name]
Specifies a unique name for the lease pool.
members
Specifies a range of IPv6 addresses separated by a hyphen.
partition
Displays the partition within which the component resides. The
default is Common.
SEE ALSO
apm profile, ltm virtual
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or
by any means, electronic or mechanical, including photocopying,
recording, or information storage and retrieval systems, for any
purpose other than the purchaser's personal use, without the express
written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2011-2012. All rights reserved.
BIG-IP 2012-10-24 apm resource ipv6-leasepool(1)