cm add-to-trust

cm add-to-trust(1)	      BIG-IP TMSH Manual	    cm add-to-trust(1)



NAME
       add-to-trust - Add a device to a trust domain.

MODULE
       cm

SYNTAX
       Run the add-to-trust program within the cm module using the syntax in
       the following section. The trust-domain name 'Root' is optional
       beginning version 13.0.0.

   MODIFY
	run add-to-trust [Root]
	  options:
	    [ ca-device | non-ca-device ]
	    device [string]
	    port [ port_number ]
	    device-name [string]
	    password [string]
	    username [string]

DESCRIPTION
       You can use the add-to-trust command to add a device to a trust domain.
       This is an alternate helper command to the modify trust-domain
       ca-devices|non-ca-devices add ...  command.

EXAMPLES
       run add-to-trust ca-device device 10.20.30.40 device-name peer1
       username homer password illiad

       Adds a device to the list of ca-devices in the trust domain.

OPTIONS
       ca-device
	    Indicates that the added device is a certificate authority device.

       device
	    Indicates the FQDN or the management-ip of the device being added
	    to the trust domain

       port Device port number if other than 443 when adding new device. This
	    parameter is optional.

       device-name
	    Used to specify the name of a new device.

       md5-fingerprint
	    SSL certificate md5 fingerprint is deprecated beginning version
	    13.0.0. Use sha1-fingerprint.

       non-ca-device
	    Indicates that the added device is a subordinate device. The
	    target device cannot be used as a signing authority.

       password
	    Specifies the password for a new device.

       serial
	    SSL certificate serial number is deprecated beginning version
	    13.0.0.  Use sha1-fingerprint.

       sha1-fingerprint
	    Specifies the SSL certificate (DER format) sha1 fingerprint when
	    verifying the identity of a new device. This field is optional.

       signature
	    SSL certificate signature is deprecated beginning version 13.0.0.
	    Use sha1-fingerprint.

       username
	    Specifies the user name required to log on to a device when adding
	    the device to the trust domain. The user "root" is invalid, and
	    will be disallowed. Any user that has administrator privileges and
	    can use iControl can be used here.

SEE ALSO
       run, tmsh

COPYRIGHT
       No part of this program may be reproduced or transmitted in any form or
       by any means, electronic or mechanical, including photocopying,
       recording, or information storage and retrieval systems, for any
       purpose other than the purchaser's personal use, without the express
       written permission of F5 Networks, Inc.

       F5 Networks and BIG-IP (c) Copyright 2013-2016. All rights reserved.



BIG-IP				  2016-10-04		    cm add-to-trust(1)