net tunnels fec
net tunnels fec(1) BIG-IP TMSH Manual net tunnels fec(1)
NAME
fec - Configures a Forward Error Correction (FEC) profile.
MODULE
net tunnels
SYNTAX
Configure the fec component within the net tunnels module using the
syntax in the following sections.
CREATE/MODIFY
create fec [name]
modify fec [name]
options:
app-service [[string] | none]
decode-idle-timeout [integer]
decode-max-packets [integer]
decode-queues [integer]
defaults-from [name]
description [string]
encode-max-delay [integer]
keepalive-interval [integer]
lzo [disabled | enabled]
repair-adaptive [disabled | enabled]
repair-packets [integer]
source-adaptive [disabled | enabled]
source-packets [integer]
udp-port [integer]
edit fec [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
=head2 DISPLAY
list fec
list fec [ [ [name] | [glob] | [regex] ] ... ]
show running-config fec
show running-config fec [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
app-service
non-default-properties
one-line
partition
DELETE
delete fec [ all | [name] ]
DESCRIPTION
You can use the fec component to create a FEC profile that you
associate with a tunnel using the tunnel component. For more
information about creating a tunnel see net tunnel.
EXAMPLES
create fec my_fec
Creates a FEC profile called my_fec.
list fec all-properties
Displays all of the properties of all of the FEC profiles.
OPTIONS
app-service
Specifies the name of the application service to which the object
belongs. The default value is none. Note: If the strict-updates
option is enabled on the application service that owns the object,
you cannot modify or delete the object. Only the application
service can modify or delete the object.
defaults-from
Specifies the existing profile from which the system imports
settings for the new profile. The default value is fec.
description
User defined description.
glob Displays the items that match the glob expression. See help glob
for a description of glob expression syntax.
name Specifies a unique name for the component. This option is required
for the commands create and modify.
partition
Displays the administrative partition within which this component
resides.
regex
Displays the items that match the regular expression. The regular
expression must be preceded by an at sign (@[regular expression])
to indicate that the identifier is a regular expression. See help
regex for a description of regular expression syntax.
decode-idle-timeout
Specifies the maximum waiting time for packets in decoding queues.
Packets waiting longer than this time are discarded. Range is from
250 to 2000 milliseconds. The default value is 1500 milliseconds.
decode-max-packets
Specifies the maximum number of waiting packets in decoding
queues. Range is from 200 to 8000. The default value is 512.
decode-queues
Specifies the number of decoding queues. Valid numbers are
8,16,32,64,128,256,512,1024. The default value is 32.
encode-max-delay
Specifies the maximum waiting time for packet aggregation. Range
is from 500 to 5000 microseconds. The default value is 500
microseconds.
keepalive-interval
Specifies the interval between keepalive (statistical data)
packets. Range is from 0 to 100 seconds. The default value is 5
seconds.
lzo Controls the use of the LZO compression algorithm to compress data
packets. The default value is enabled.
repair-adaptive
Controls the use of the adaptive FEC repair technique to modify
the number of redundant packets according to actual network
conditions. The default value is enabled.
repair-packets
Specifies the number of redundant packets to add. Range is from 0
to 15. The default value is 15. This value should be less than or
equal to the value specified for source-packets.
source-adaptive
Controls the use of the adaptive FEC source packets technique to
reduce the number of packets for better MTU usage. The default
value is enabled.
source-packets
Specifies the number of packets into which the system divides the
aggregated payload. Range is from 1 to 15. The default value is
15.
udp-port
Specifies the local port for receiving FEC packets. The default
value is 8288.
SEE ALSO
create, delete, edit, glob, list, modify, net tunnels ipip, net tunnels
tunnel, net tunnels wccp, regex, show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or
by any means, electronic or mechanical, including photocopying,
recording, or information storage and retrieval systems, for any
purpose other than the purchaser's personal use, without the express
written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008-2013. All rights reserved.
BIG-IP 2014-05-16 net tunnels fec(1)