net tunnels v6rd

net tunnels v6rd(1)	      BIG-IP TMSH Manual	   net tunnels v6rd(1)



NAME
       v6rd - Configures a 6RD profile.

MODULE
       net tunnels

SYNTAX
       Configure the v6rd component within the net tunnels module using the
       syntax in the following sections.

   CREATE/MODIFY
	create v6rd [name]
	modify v6rd [name]
	  options:
	    app-service [[string] | none]
	    defaults-from [ [name] | none]
	    description [string]
	    v6rdprefix [IPv6 address]
	    v6rdprefixlen [integer]
	    ipv4prefix [IPv4 address]
	    ipv4prefixlen [integer]

	edit v6rd [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    all-properties
	    non-default-properties

   DISPLAY
	list v6rd
	list v6rd [ [ [name] | [glob] | [regex] ] ... ]
	show running-config v6rd
	show running-config v6rd [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    all-properties
	    app-service
	    non-default-properties
	    one-line
	    partition

   DELETE
	delete v6rd [ all | [name] ]

DESCRIPTION
       You can use the v6rd component to create a v6rd profile that you
       associate with a tunnel using the tunnel component. For more
       information about creating a tunnel see net tunnel.

EXAMPLES
       create v6rd my_v6rd

       Creates a 6RD profile called my_v6rd.

       list v6rd all-properties

       Displays all the properties of all the 6RD profiles.

OPTIONS
       app-service
	    Specifies the name of the application service to which the object
	    belongs. The default value is none. Note: If the strict-updates
	    option is enabled on the application service that owns the object,
	    you cannot modify or delete the object. Only the application
	    service can modify or delete the object.

       defaults-from
	    Specifies the existing profile from which the system imports
	    settings for the new profile. The default value is v6rd.

       description
	    User defined description.

       glob Displays the items that match the glob expression. See help glob
	    for a description of glob expression syntax.

       name Specifies a unique name for the component. This option is required
	    for the commands create and modify.

       partition
	    Displays the administrative partition within which this component
	    resides.

       regex
	    Displays the items that match the regular expression. The regular
	    expression must be preceded by an at sign (@[regular expression])
	    to indicate that the identifier is a regular expression. See help
	    regex for a description of regular expression syntax.

       v6rdprefix
	    Specifies the IPv6 prefix for 6rd domain.

       v6rdprefixlen
	    Specifies the IPv6 prefix length of the 6rd domain. The default is
	    56.

       ipv4prefix
	    As an extension not mentioned in the RFC5969, it specifies the
	    IPv4 prefix for the Customer-Edge (CE) devices of a 6RD domain at
	    a Border-Relay (BR) in case that the subnet prefixes used by the
	    6RD devices do not share the same IPv4 prefix. If they do, there
	    is no need to configure this parameter. The default value is
	    0.0.0.0.

       ipv4prefixlen
	    Also noted as IPv4MaskLen in RFC5969, it specifies the number of
	    identical high-order bits shared by all CE and BR IPv4 addresses
	    in a given 6RD domain. The valid range is from zero to 32. It is a
	    required value for create. It defaults to zero, i.e. the full ipv4
	    address must be encapsulated.

SEE ALSO
       create, delete, edit, glob, list, modify, net tunnels tunnel, regex,
       show, tmsh

COPYRIGHT
       No part of this program may be reproduced or transmitted in any form or
       by any means, electronic or mechanical, including photocopying,
       recording, or information storage and retrieval systems, for any
       purpose other than the purchaser's personal use, without the express
       written permission of F5 Networks, Inc.

       F5 Networks and BIG-IP (c) Copyright 2011-2013, 2015-2016. All rights
       reserved.



BIG-IP				  2016-03-14		   net tunnels v6rd(1)