pem protocol radius-avp
pem protocol radius-avp(1) BIG-IP TMSH Manual pem protocol radius-avp(1)
NAME
radius-avp - Configures RADIUS AVPs in Policy Enforcement Manager
(PEM).
MODULE
pem protocol
SYNTAX
Configure the radius-avp component within the pem protocol module using
the syntax shown in the following sections.
CREATE/EDIT/MODIFY
create radius-avp [name]
modify radius-avp [name]
options:
app-service [[string] | none]
data-type [3gpp-rat-type | 3gpp-user-location-info | integer | ipaddr | ipv6addr | ipv6prefix | octet | string | time]
description [string]
max-length [integer]
min-length [integer]
type [integer]
vendor-id [integer]
vendor-type [integer]
edit radius-avp [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
DISPLAY
list radius-avp
list radius-avp [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
one-line
partition
DELETE
delete radius-avp [name]
Note: You must remove all references to a radius-avp before you can
delete the radius-avp.
DESCRIPTION
You can use the radius-avp component to configure RADIUS AVP
definitions in Policy Enforcement Manager.
EXAMPLES
create radius-avp imeisv { data-type string type 26 vendor-id 10415
vendor-type 20 }
Creates a PEM radius-avp imeisv which is an Vendor Specific Attribute
of 3GPP with type value 26.
delete radius-avp imeisv
Deletes the radius-avp named imeisv.
list radius-avp imeisv
Displays the properties of the radius-avp named imeisv.
OPTIONS
app-service
Specifies the name of the application service to which the object
belongs. The default value is none. Note: If the strict-updates
option is enabled on the application service that owns the object,
you cannot modify or delete the object. Only the application
service can modify or delete the object.
data-type
Specifies the data type of the RADIUS AVP. The default value is
string.
The options are:
3gpp-rat-type
specifies the value format to be encoded or decoded as the
3GPP-RAT-Type defined in 3GPP TS 29.061.
3gpp-user-location-info
specifies the value format to be encoded or decoded as the
3GPP-User-Location-Info defined in 3GPP TS 29.061.
integer
32-bit unsigned integer in network byte order.
ipaddr
IPv4 address in network byte order.
ipv6addr
IPv6 address in network byte order.
ipv6prefix
IPv6 prefix data format is defined in RFC 3162.
octet
UTF-8 text [RFC3629], totaling 253 octets or less in length.
string
string (i.e., binary data), totaling 253 octets or less in
length. This includes the opaque encapsulation of data
structures defined outside of RADIUS.
time time as a 32-bit unsigned value in network byte order and in
seconds since 00:00:00 UTC, January 1, 1970.
description
User defined description.
max-length
Specifies the maximum data length of the RADIUS AVP/VSA. It
doesn't include the AVP/VSP header. The default value is 253.
min-length
Specifies the minimum data length of the RADIUS AVP/VSA. It
doesn't include the AVP/VSP header. The default value is 1.
name Specifies a unique name for the component. This option is required
for the commands create, delete, and modify.
type Specifies the type of the RADIUS AVP. 26 is for vendor specific
attribute (VSA).
vendor-id
Specifies the vendor-id of the RADIUS VSA. This property is
mandatory if type is 26.
vendor-type
Specifies the vendor-type of the RADIUS VSA. This property is
mandatory if type is 26.
SEE ALSO
create, delete, edit, glob, list, modify, pem protocol profile gx, pem
protocol profile radius, pem protocol diameter-avp, pem subscriber-
attribute, regex, show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or
by any means, electronic or mechanical, including photocopying,
recording, or information storage and retrieval systems, for any
purpose other than the purchaser's personal use, without the express
written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2013-2016. All rights reserved.
BIG-IP 2016-03-14 pem protocol radius-avp(1)