security datasync local-profile
security datasync local-profilBIG-IP TMSH Masecurity datasync local-profile(1)
NAME
local-profile - Manage the Datasync Framework settings that are local,
and not synced across devices.
MODULE
security datasync
SYNTAX
Manage the local-profile component within the security datasync module
using the syntax shown in the following sections.
MODIFY
modify local-profile [table_name]
options:
buf-size [integer]
ds-area [ none | asm | fps ]
rows-bulk [integer]
gen-timeout-sec [integer]
min-mem-mb [integer]
min-cpu-percent [integer]
max-gen-rows [ infinite | [integer] ]
keep-conf-files [integer]
gen-pause-sec [integer]
offline-until-gen [ enable | disable ]
edit local-profile [table_name]
options:
all-properties
non-default-properties
DISPLAY
list local-profile
list local-profile [table_name]
show running-config local-profile
show running-config local-profile [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
one-line
partition
recursive
DESCRIPTION
You can use the local-profile component to modify or display a datasync
local-profile for use with the Datasync Framework. Each profile is for
a single table. The profiles cannot be created or deleted, only
modified. These profiles are local; they are not synced across
devices.
OPTIONS
buf-size
Specifies the size of each buffer in the table, in bytes.
ds-area
Specifies the memory area on which the table will be allocated.
rows-bulk
Specifies the number of rows to generate in each bulk.
gen-timeout-sec
Specifies the timeout of running the external generator per single
bulk.
min-mem-mb
Specifies the minimum available memory in MB to start generator in
non-urgent mode.
min-cpu-percent
Specifies the minimum available CPU percent to start generator in
non-urgent mode.
max-gen-rows
Specifies the maximum rows to generate.
keep-conf-files
Specifies the number of configuration files to keep when rolling
old ones.
gen-pause-sec
Specifies the time in seconds to pause between each bulk
generation when in non-urgent mode.
offline-until-gen
Specifies if the system should be offline until the table is
generated.
SEE ALSO
edit, list, modify, show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or
by any means, electronic or mechanical, including photocopying,
recording, or information storage and retrieval systems, for any
purpose other than the purchaser's personal use, without the express
written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008-2014. All rights reserved.
BIG-IP 2014-07-10security datasync local-profile(1)