security protocol-inspection complianceΒΆ

security protocol-inspection cBIG-IPsecuritynprotocol-inspection compliance(1)



NAME
       compliance - Show compliance inspections (this section is not
       modifiable)

MODULE
       security protocol-inspection compliance

SYNTAX
   DISPLAY
	list security protocol-inspection compliance
	 options:
	  all
	  all-properties
	  non-default-properties
	  one-line
	 properties:
	  accuracy [high | low | medium]
	  description [string]
	  service [string]
	  action [accept | drop | reject]
	  direction [any | to-client | to-server]
	  log [yes | no]
	  app-service [string]
	  documentation [string]
	  performance-impact [high | low | medium]
	  systems [string]
	  attack-type [string]
	  id [integer]
	  protocol [any | tcp | udp]
	  risk [critical | high | low | medium]
	  value [string]
	  value-type [int | string | bool | enum | vector-string | vector-int | vector-enum]

   DISPLAY
	list security protocol-inspection compliance

DESCRIPTION
       Use this command to get default information about compliance checks.
       This command does not allow you to create/modify compliance checks.

EXAMPLES
       list security protocol-inspection compliance

       Displays all compliance inspections.

       list security protocol-inspection compliance ftp_malformed_param

       Displays compliance inspection "ftp_malformed_param".

PROPERTIES
       accuracy
	    Specifies the accuracy of the compliance inspection.

       description
	    Specifies the description of the compliance inspection. Also this
	    parameter is used in logging when compliance inspection is
	    matched.

       service
	    Specifies target-based service.

       action
	    Specifies enforcement action for matched compliance inspection.

       direction
	    Specifies the flow direction for which this compliance inspection
	    will be applied.

       log  Specifies whether the inspection will be logged if it matches the
	    compliance inspection.

       app-service
	    Specifies app service.

       documentation
	    Specifies compliance inspection documentation.

       performance-impact
	    Specifies performance impact of this compliance inspection.

       systems
	    Specifies systems where this compliance inspection can be matched.

       attack-type
	    Specifies compliance inspection attack type.

       id   Specifies compliance inspection identifier.

       protocol
	    Specifies transport protocol where this compliance inspection can
	    be matched (udp, tcp, any).

       risk Specifies compliance inspection risk.

       value
	    Specifies value for specific compliance check depending on
	     field (see below).

       value-type
	    Specifies value type for specific compliance check.

SEE ALSO
       list, security, tmsh

COPYRIGHT
       No part of this program may be reproduced or transmitted in any form or
       by any means, electronic or mechanical, including photocopying,
       recording, or information storage and retrieval systems, for any
       purpose other than the purchaser's personal use, without the express
       written permission of F5 Networks, Inc.

       F5 Networks and BIG-IP (c) Copyright 2008, 2012-2017. All rights
       reserved.



BIG-IP				  20security protocol-inspection compliance(1)