sys raid array
sys raid array(1) BIG-IP TMSH Manual sys raid array(1)
NAME
array - Configures an array of hard disks on the BIG-IP(r) system.
MODULE
sys raid
SYNTAX
Configure the array component within the sys raid module using the
syntax in the following sections.
MODIFY
modify array [name] [ [add | remove] [hard disk name] ]
DISPLAY
show array
show array [name]
options:
field-fmt
DESCRIPTION
You can use the array component to add a hard disk to or remove a hard
disk from an array of disks, or to display information about an array
of disks.
EXAMPLES
show array
Displays information about all of the arrays that are configured on the
system.
modify array MD1 remove HD2
Removes hard disk, HD2 from array, MD1.
OPTIONS
hard disk name
Specifies the name of the hard disk that you want to add to or
remove from the array. This option is required for the command
modify.
name Specifies the name of the array. This option is required for the
command modify.
SEE ALSO
modify, show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or
by any means, electronic or mechanical, including photocopying,
recording, or information storage and retrieval systems, for any
purpose other than the purchaser's personal use, without the express
written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2009-2010. All rights reserved.
BIG-IP 2010-03-11 sys raid array(1)