apm resource webtop-link
apm resource webtop-link(1) BIG-IP TMSH Manual apm resource webtop-link(1)
NAME
webtop-link - Configures a webtop link resource.
MODULE
apm resource
SYNTAX
Configure the webtop-link component within the resource module using the syntax shown in the following
sections.
CREATE/MODIFY
create webtop-link [name]
modify webtop-link [name]
options:
application-uri [string]
app-service [[string] | none]
customization-group [string]
description [[string] | none]
location-specific [true | false]
edit webtop-link [ [ [name] | [glob] | [regex] ] ... ]
options:
all
DISPLAY
list webtop-link
list webtop-link [ [ [name] | [glob] | [regex] ] ... ]
show running-config webtop-link
show running-config webtop-link [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
one-line
show webtop-link
show webtop-link [name]
DELETE
delete webtop-link [name]
DESCRIPTION
Configures the settings necessary to define a link to a webtop that is displayed to the end-user as part of
the access policy execution.
EXAMPLES
create webtop-link mywebtoplinkcg1 application-uri "http://www.externalsite.com/"
Creates a webtop named mywebtoplinkcg1 with the application-uri of http://www.externalsite.com/.
OPTIONS
application-uri
Specifies the application URI of the external portal to which this resource provides access for this
webtop link. This is a required setting.
app-service
Specifies the name of the application service to which the object belongs. The default value is none.
Note: If the strict-updates option is enabled on the application service that owns the object, you cannot
modify or delete the object. Only the application service can modify or delete the object.
customization-group
Specifies the customization settings for the webtop.
Note: You must create a customization group of type webtop before you can create a webtop resource. If
you do not specify a customization group, a group will be created automatically.
description
Specifies a description of the resource. The default is none.
location-specific
Specifies whether or not this object contains one or more attributes with values that are specific to the
location where the BIG-IP device resides. The location-specific attribute is either true or false. When
using policy sync, mark an object as location-specific to prevent errors that can occur when policies
reference objects, such as authentication servers, that are specific to a certain location.
SEE ALSO
tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2011-2012. All rights reserved.
BIG-IP 2012-10-24 apm resource webtop-link(1)