auth radiusΒΆ

auth radius(1)					  BIG-IP TMSH Manual				       auth radius(1)

NAME
       radius - Configures a RADIUS configuration object for implementing remote RADIUS-based authentication of
       BIG-IP(r) system users.

MODULE
       auth

SYNTAX
       Configure the radius component within the auth module using the syntax shown in the following sections.

   CREATE/MODIFY
	create radius [name]
	modify radius [name]
	  options:
	    accounting-bug [disabled | enabled]
	    app-service [[string] | none]
	    client-id [none | [string] ]
	    debug [disabled | enabled]
	    description [string]
	    retries [integer]
	    servers [add | delete | replace-all-with]
	      { [ [hostname] | [ip address] ... ] }
	    servers [default | none]
	    service-type [default | login | framed | callback-login |
			  callback-framed | outbound | administrative |
			  nas-prompt | authenticate-only |
			  callback-nas-promit | call-check |
			  callback-administrative]

	edit radius [ [ [name] | [glob] | [regex] ] ...]
	   options:
	     all-properties
	     non-default-properties

   DISPLAY
	list radius
	list radius [ [ [name] | [glob] | [regex] ] ...]
	show running-config radius
	show running-config radius [ [ [name] | [glob] | [regex] ] ...]
	  options:
	    all-properties
	    non-default-properties
	    one-line
	    partition

   DELETE
	delete radius [name]

DESCRIPTION
       To authenticate BIG-IP system users when their authentication data is stored on a remote RADIUS server, you
       configure a RADIUS server, configure a RADIUS configuration object that references that RADIUS server, and
       then activate RADIUS authentication for the BIG-IP system. In this case, client credentials are based on basic
       HTTP authentication (that is, user name and password).

       To configure RADIUS authentication for the BIG-IP system:

       1. Use the radius-server component in the auth module to configure a RADIUS server. For more information about
       creating a RADIUS server, see help radius-server.

       2. Use the radius component in the auth module to create a RADIUS configuration object that references the
       RADIUS server you created in Step 1.

       3. To activate RADIUS authentication for BIG-IP system users, type the following command sequence: modify /
       auth source type radius

EXAMPLES
       create radius bigip_radius_auth servers add {myradiusserver}

       Creates a RADIUS configuration object named bigip_radius_auth.

       delete radius bigip_radius_auth

       Deletes the RADIUS configuration component named bigip_radius_auth.

OPTIONS
       accounting-bug
	    Enables or disables validation of the accounting response vector. This option is necessary only on older
	    servers. The default value is disabled.

       app-service
	    Specifies the name of the application service to which the RADIUS configuration object belongs. The
	    default value is none. Note: If the strict-updates option is enabled on the application service that owns
	    the object, you cannot modify or delete the RADIUS configuration object. Only the application service can
	    modify or delete the RADIUS configuration object.

       client-id
	    Sends a NAS-Identifier RADIUS attribute with string bar. If you do not specify a value for this option,
	    the system uses the pluggable authentication module (PAM) service type. You can disable this feature by
	    specifying a blank client ID.

       debug
	    Enables or disables syslog-ng debugging information at the LOG DEBUG level. F5 Networks does not
	    recommend this option for normal use. The default value is disabled.

       description
	    User defined description.

       glob Displays the items that match the glob expression. See help glob for a description of glob expression
	    syntax.

       name Specifies a unique name for the component. This option is required for the commands create and modify.

       partition
	    Displays the partition within which the component resides.

       regex
	    Displays the items that match the regular expression. The regular expression must be preceded by an at
	    sign (@[regular expression]) to indicate that the identifier is a regular expression. See help regex for
	    a description of regular expression syntax.

       retries
	    Specifies the number of authentication retries that the BIG-IP local traffic management system allows
	    before authentication fails. The default value is 3.

       service-type
	    Specifies the type of service used for the RADIUS server. The default is default, which behaves as
	    authenticate-only.

       servers
	    Specifies the host names or IP addresses of existing RADIUS servers that the BIG-IP system uses to obtain
	    authentication data.

SEE ALSO
       auth radius-server, auth user, create, delete, glob, list, modify, regex, run, show, tmsh

COPYRIGHT
       No part of this program may be reproduced or transmitted in any form or by any means, electronic or
       mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
       other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.

       F5 Networks and BIG-IP (c) Copyright 2008-2013, 2016. All rights reserved.

BIG-IP						      2016-03-14				       auth radius(1)