gtm monitor tcp-half-open
gtm monitor tcp-half-open(1) BIG-IP TMSH Manual gtm monitor tcp-half-open(1)
NAME
tcp-half-open - Configures a Transmission Control Protocol (TCP) Half Open monitor.
MODULE
gtm monitor
SYNTAX
Configure the tcp-half-open component within the gtm monitor module using the syntax in the following
sections.
CREATE/MODIFY
create tcp-half-open [name]
modify tcp-half-open [name]
options:
defaults-from [name]
description [string]
destination [ [ ipv4 address[:port] ] | [ ipv6 address[.port] ] ]
ignore-down-response [enabled | disabled]
interval [integer]
probe-attempts [integer])
probe-interval [integer])
probe-timeout [integer]
timeout [integer]
transparent [disabled | enabled]
edit tcp-half-open [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
DISPLAY
list tcp-half-open
list tcp-half-open [ [ [name] | [glob] | [regex] ] ... ]
show running-config tcp-half-open
show running-config tcp-half-open [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
one-line
partition
DELETE
delete tcp-half-open [name]
Note: You cannot delete default monitors.
DESCRIPTION
You can use the tcp-half-open component to configure a custom monitor, or you can use the default TCP Half
Open monitor that the Global Traffic Manager provides.
For more information about configuring monitors, refer to the Configuration Guide for BIG-IP(r) Global Traffic
Management.
EXAMPLES
create tcp-half-open my_tcp-half-open defaults-from tcp_half_open
Creates a monitor named my_tcp-half-open that inherits properties from the default TCP Half Open monitor.
list tcp-half-open
Displays the properties of all of the TCP Half Open monitors.
OPTIONS
defaults-from
Specifies the name of the monitor from which you want your custom monitor to inherit settings. The
default value is tcp_half_open.
description
User defined description.
destination
Specifies the IP address and service port of the resource that is the destination of this monitor. The
default value is *:*.
Possible values are:
*:* Specifies to perform a health check on the IP address and port supplied by a pool member.
*:port
Specifies to perform a health check on the server with the IP address supplied by the pool member
and the port you specify.
IP address:port
Specifies to mark a pool member up or down based on the response of the server at the IP address and
port you specify.
IP address:port (with the transparent option enabled)
Specifies to perform a health check on the server at the IP address and port you specify, route the
check through the IP address and port supplied by the pool member, and mark the pool member (the
gateway) up or down accordingly.
glob Displays the items that match the glob expression. See help glob for a description of glob expression
syntax.
ignore-down-response
Specifies whether the monitor ignores a down response from the system it is monitoring. The default value
is disabled.
interval
Specifies the frequency at which the system issues the monitor check. The default value is 30 seconds.
name Specifies a unique name for the component. This option is required for the commands create, delete, and
modify.
partition
Displays the administrative partition within which the component resides.
probe-attempts
Specifies the number of times the BIG-IP system attempts to probe the host server, after which the BIG-IP
system considers the host server down or unavailable. The default value is 3.
probe-interval
Specifies the frequency at which the BIG-IP system probes the host server. The default value is 1.
probe-timeout
Specifies the number of seconds after which the BIG-IP system times out the probe request to the BIG-IP
system. The default value is 5 seconds.
regex
Displays the items that match the regular expression. The regular expression must be preceded by an at
sign (@[regular expression]) to indicate that the identifier is a regular expression. See help regex for
a description of regular expression syntax.
timeout
Specifies the number of seconds the target has in which to respond to the monitor request. The default
value is 120 seconds.
If the target responds within the set time period, it is considered up. If the target does not respond
within the set time period, it is considered down. Also, if the target responds with a RESET packet, the
system immediately flags the target as down without waiting for the timeout interval to expire.
transparent
Specifies whether the monitor operates in transparent mode. Monitors in transparent mode can monitor pool
members through firewalls. The default value is disabled.
SEE ALSO
create, delete, edit, glob, gtm pool, gtm server, list, modify, regex, show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008-2010. All rights reserved.
BIG-IP 2017-08-15 gtm monitor tcp-half-open(1)