gtm monitor wap
gtm monitor wap(1) BIG-IP TMSH Manual gtm monitor wap(1)
NAME
wap - Configures a Wireless Application Protocol (WAP) monitor.
MODULE
gtm monitor
SYNTAX
Configure the wap component within the gtm monitor module using the syntax in the following sections.
CREATE/MODIFY
create wap [name]
modify wap [name]
options:
accounting-node [none | [RADIUS server name] ]
accounting-port [ [integer] | none]
call-id [none | [RADIUS server 11 digit phone number] ]
check-until-up [enabled | disabled]
debug [no | yes]
defaults-from [name]
description [string]
destination [ [ ipv4 address[:port] ] | [ ipv6 address[.port] ] ]
framed-address [none | [RADIUS framed IP address] ]
ignore-down-response [enabled | disabled]
interval [integer]
probe-timeout [integer]
recv [none | [string] ]
secret [none | [password] ]
send [none | [string] ]
server-id [none | [RADIUS NAS-ID] ]
session-id [none | [RADIUS session ID] ]
timeout [integer]
edit wap [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
DISPLAY
list wap
list wap[ [ [name] | [glob] | [regex] ] ... ]
show running-config wap
show running-config wap[ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
one-line
partition
DELETE
delete wap [name]
Note: You cannot delete default monitors.
DESCRIPTION
You can use the wap component to configure a custom monitor, or you can use the default WAP monitor that the
Global Traffic Manager provides. This type of monitor requests the URL specified in the send option, and finds
the string specified in the recv option somewhere in the data returned by the URL response.
EXAMPLES
create wap my_wap defaults-from wap
Creates a monitor named my_wap that inherits properties from the default WAP monitor.
list wap
Displays the properties of all of the WAP monitors.
OPTIONS
accounting-node
Specifies the RADIUS server that provides authentication for the WAP target. Note that if you configure
the accounting-port option, but you do not configure the this option, the system assumes that the RADIUS
server and the WAP server are the same system.
accounting-port
Specifies the port that the monitor uses for RADIUS accounting. The default value is none. A value of 0
(zero) disables RADIUS accounting.
call-id
Specifies the 11-digit phone number for the RADIUS server. The default value is none.
debug
Specifies whether the monitor sends error messages and additional information to a log file created and
labeled specifically for this monitor. You can use the log information to help diagnose and troubleshoot
unsuccessful health checks. The default value is no.
The options are:
no Specifies that the system does not redirect error messages and additional information related to
this monitor.
yes Specifies that the system redirects error messages and additional information to the
/var/log/monitors/--.log file.
defaults-from
Specifies the name of the monitor from which you want your custom monitor to inherit settings. The
default value is wap.
description
User defined description.
destination
Specifies the IP address and service port of the resource that is the destination of this monitor. The
default value is *:*.
Possible values are:
*:* Specifies to perform a health check on the IP address and port supplied by a pool member.
*:port
Specifies to perform a health check on the server with the IP address supplied by the pool member
and the port you specify.
IP address:port
Specifies to mark a pool member up or down based on the response of the server at the IP address and
port you specify.
framed-address
Specifies the RADIUS framed IP address. The default value is none.
glob Displays the items that match the glob expression. See help glob for a description of glob expression
syntax.
ignore-down-response
Specifies whether the monitor ignores a down response from the system it is monitoring. The default value
is disabled.
interval
Specifies the frequency at which the system issues the monitor check. The default value is 10 seconds.
name Specifies a unique name for the component. This option is required for the commands create, delete, and
modify.
partition
Displays the administrative partition within which the component resides.
probe-timeout
Specifies the number of seconds after which the BIG-IP(r) system times out the probe request to the BIG-
IP system. The default value is 5 seconds.
recv Specifies the text string that the monitor looks for in the returned resource. The most common receive
expressions contain a text string that is included in an HTML file on your site. The text string can be
regular text, HTML tags, or image names. If you do not specify both a value for both the send and recv
options, the monitor performs a simple service check and connect only. The default value is none.
regex
Displays the items that match the regular expression. The regular expression must be preceded by an at
sign (@[regular expression]) to indicate that the identifier is a regular expression. See help regex for
a description of regular expression syntax.
secret
Specifies the password the monitor needs to communicate with the resource. The default value is none.
send Specifies the text string that the monitor sends to the target object. The default setting is GET /,
which retrieves a default HTML file for a web site.
To retrieve a specific page from a web site, specify a fully-qualified path name, for example, GET
/www/company/index.html. Since the string may have special characters, the system may require that the
string be enclosed with single quotation marks.
If this value is null, then a valid connection suffices to determine that the service is up. In this
case, the system does not need the recv option and ignores the option even if it is not null. The default
value is none.
server-id
Specifies the RADIUS NAS-ID for this system when configuring a RADIUS server. The default value is none.
session-id
Specifies the RADIUS session identification number when configuring a RADIUS server. The default value is
none.
timeout
Specifies the number of seconds the target has in which to respond to the monitor request. The default
value is 31 seconds.
If the target responds within the set time period, it is considered up. If the target does not respond
within the set time period, it is considered down. Also, if the target responds with a RESET packet, the
system immediately flags the target as down without waiting for the timeout interval to expire.
SEE ALSO
create, delete, edit, glob, gtm pool, list, modify, regex, show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008-2010, 2012-2014. All rights reserved.
BIG-IP 2017-08-15 gtm monitor wap(1)