ltm message-routing mqtt profile router

ltm message-routing mqtt profile router(1)	  BIG-IP TMSH Manual	   ltm message-routing mqtt profile router(1)

NAME
       router - Configures a MQTT Router profile.

MODULE
       ltm message-routing mqtt profile

SYNTAX
       Configure the router component within the ltm message-routing mqtt profile module using the syntax shown in
       the following sections.

   CREATE/MODIFY
	create router [name]
	modify router [name]
	  options:
	    app-service [[string] | none]
	    defaults-from [[name] | none]
	    description [string]
	    max-pending-bytes [integer]
	    max-payload-pending-bytes [integer]
	    max-pending-messages [integer]
	    max-retries [integer]
	    per-peer-stats [enabled | disabled]
	    route [add | default | delete | none | replace-all-with] [route_name]
	    traffic-group [[string] | default | non-default | none]
	    use-local-connection [disabled | enabled]

	edit router [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    all-properties
	    non-default-properties

	reset-stats router
	reset-stats router [ [ [name] | [glob] | [regex] ] ... ]

   DISPLAY
	list router
	list router [ [ [name] | [glob] | [regex] ] ... ]
	show running-config router
	show running-config router [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    all-properties
	    non-default-properties
	    one-line
	    partition

	show router
	show router [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    (default | exa | gig | kil | meg | peta | raw | tera | yotta | zetta)
	    field-fmt

   DELETE
	delete router [name]

DESCRIPTION
       You can use the router component to manage a MQTT router profile.

EXAMPLES
       create router my_router_profile defaults-from router

       Creates a MQTT router profile named my_router_profile using the system defaults.

       create router my_router_profile route route1

       Creates a MQTT router profile named my_router_profile with a static route.

OPTIONS
       app-service
	    Specifies the name of the application service to which the object belongs. The default value is none.
	    Note: If the strict-updates option is enabled on the application service that owns the object, you cannot
	    modify or delete the object. Only the application service can modify or delete the object.

       defaults-from
	    Specifies the profile that you want to use as the parent profile. Your new profile inherits all of the
	    settings and values from the specified parent profile. The default value is router.

       description
	    User defined description.

       glob Displays the items that match the glob expression. See help glob for a description of glob expression
	    syntax.

       max-pending-bytes
	    Specifies the maximum number of bytes contained within pending messages that will be held while waiting
	    for a connection to a peer to be created. Once reached any additional messages to the peer will be
	    flagged as undeliverable and returned to the originator. The default value is 32768.

       max-payload-pending-bytes
	    Specifies the maximum number of payload bytes contained within pending messages that will be held before
	    exerting flow control and eventually closing the TCP window. The default value is 32768.

       max-pending-messages
	    Specifies the maximum number of pending messages that will be held while waiting for a connection to a
	    peer to be created. Once reached any additional messages to the peer will be flagged as undeliverable and
	    returned to the originator. The default value is 64.

       max-retries
	    This attribute sets the maximum number of time a message may be resubmitted for rerouting by the
	    MR::retry iRule command. The default value is 1.

       per-peer-stats
	    If enabled, the profile specific statistics will be captured for each pool member. The default value is
	    disabled.

       partition
	    Displays the administrative partition within which the component resides.

       regex
	    Displays the items that match the regular expression. The regular expression must be preceded by an at
	    sign (@[regular expression]) to indicate that the identifier is a regular expression. See help regex for
	    a description of regular expression syntax.

       route
	    Specifies a static route.

       traffic-group
	    Specifies the traffic group on which the router is active. The default traffic group is inherited from
	    the containing folder.

       inherited-traffic-group
	    Read-only property that indicates if the traffic-group is inherited from the parent folder.

       use-local-connection
	    Enables or disables a preference for local connections established by the ingress TMM over connections
	    established by other TMM's when selecting the egress connection to destination peer.

SEE ALSO
       create, delete, edit, glob, list, ltm virtual, modify, regex, reset-stats, show, tmsh

COPYRIGHT
       No part of this program may be reproduced or transmitted in any form or by any means, electronic or
       mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
       other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.

       F5 Networks and BIG-IP (c) Copyright 2013-2014, 2016-2017. All rights reserved.

BIG-IP						      2019-07-02	   ltm message-routing mqtt profile router(1)