ltm message-routing mqtt route

ltm message-routing mqtt route(1)		  BIG-IP TMSH Manual		    ltm message-routing mqtt route(1)

NAME
       route - Configures a static route for use in MQTT message routing.

MODULE
       ltm message-routing mqtt

SYNTAX
       Configure the route component within the ltm message-routing mqtt module using the syntax shown in the
       following sections.

   CREATE/MODIFY
	create route [name]
	modify route [name]
	  options:
	    app-service [[string] | none]
	    description [string]
	    peer [peer_name]
	    virtual-server [virtual-server_name]

	edit route [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    all-properties
	    non-default-properties

   DISPLAY
	list route
	list route [ [ [name] | [glob] | [regex] ] ... ]
	show running-config route
	show running-config route [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    all-properties
	    non-default-properties
	    one-line
	    partition

	show route
	show route [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    (default | exa | gig | kil | meg | peta | raw | tera | yotta | zetta)
	    field-fmt

   DELETE
	delete route [name]

DESCRIPTION
       You can use the route component to define the URI's, virtual server, peers and peer selection mode of a
       message routing MQTT static route.

EXAMPLES
       create route my_route

       Creates a route instance named my_route using the system defaults.

       create route my_route peer peer1

       Creates a route instance named my_route that will use peer1 for forwarding messages.

OPTIONS
       app-service
	    Specifies the name of the application service to which the object belongs. The default value is none.
	    Note: If the strict-updates option is enabled on the application service that owns the object, you cannot
	    modify or delete the object. Only the application service can modify or delete the object.

       description
	    User defined description.

       peer Specifies a peer to use for forwarding messages.

       virtual-server
	    Specifies the virtual server on which connections will be routed to this route. If the virtual server is
	    unset, messages originating on any connection may be routed to the route.

SEE ALSO
       create, delete, edit, glob, list, ltm virtual, modify, regex, show, tmsh, ltm message-routing mqtt route

COPYRIGHT
       No part of this program may be reproduced or transmitted in any form or by any means, electronic or
       mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
       other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.

       F5 Networks and BIG-IP (c) Copyright 2013-2014, 2016-2017. All rights reserved.

BIG-IP						      2018-10-20		    ltm message-routing mqtt route(1)