ltm message-routing sip transport-config

ltm message-routing sip transport-config(1)	  BIG-IP TMSH Manual	  ltm message-routing sip transport-config(1)

NAME
       transport-config - Configures a sip transport-config instance for routing sip message protocol messages.

MODULE
       ltm message-routing sip

SYNTAX
       Configure the transport-config component within the ltm message-routing sip module using the syntax shown in
       the following sections.

   CREATE/MODIFY
	create transport-config [name]
	modify transport-config [name]
	  options:
	    app-service [[string] | none]
	    description [string]
	    profiles [add | delete | replace-all-with] {
	      [profile_name ...] {
		context [all | clientside | serverside]     read-only attribute for v12.0.0 or greater.
	      }
	    }
	    rules { [none | [rule_name ... ] }
	    source-address-translation {
	      options:
		pool [ [pool_name] | none]
		type [ automap | snat | none ]
	    }
	    source-port [integer]
	    source-port-mode [change | preserve | preserve-strict]

	edit transport-config [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    all-properties
	    non-default-properties

   DISPLAY
	list transport-config
	list transport-config [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    all-properties
	    non-default-properties
	    one-line
	    partition

   DELETE
	delete transport-config [name]

DESCRIPTION
       You can use the transport-config component to define the profiles, rules, and source-address-translation of an
       outgoing connection.

EXAMPLES
       create transport-config my_transport-config

       Creates a transport-config instance named my_transport-config using the system defaults.

       create transport-config my_transport-config { profiles add { my_sipmsg my_tcp } }

       Creates a transport-config instance named my_transport-config that will use two profiles, my_sipmsg and
       my_tcp, to create and configure an outgoing connection. The outgoing connection is automatically configured
       with the router instance that created the connection.

OPTIONS
       app-service
	    Specifies the name of the application service to which the object belongs. The default value is none.
	    Note: If the strict-updates option is enabled on the application service that owns the object, you cannot
	    modify or delete the object. Only the application service can modify or delete the object.

       description
	    User defined description.

       profiles
	    Specifies a list of profiles that the outgoing connection uses to use to direct and manage traffic. The
	    default value is none.

       rules
	    Specifies a list of iRules, separated by spaces, that customize the transport configuration to direct and
	    manage traffic. The default value is none.

       source-address-translation
	    Specifies the type of source address translation enabled for the transport configuration, as well as the
	    pool that the source address translation uses.

	    pool Specifies the name of a SNAT pool used by the specified transport configuration.

	    type Specifies the type of source address translation associated with the specified transport
		 configuration.

		 The options are:

		 automap
		      Specifies the use of self IP addresses for transport configuration server source address
		      translation.

		 none Specifies no source address translation is used by the transport configuration.

		 snat Specifies the use of a SNAT pool of translation addresses for virtual server source address
		      translation.

       source-port
	    Specifies the source port to be used for the connection being created. If source-port-mode is change,
	    this setting has no effect. The default value is 0.

       source-port-mode
	    Specifies how the system should select a source port for the outgoing connection. The default value is
	    change.

	    The options are:

	    change
		 Selects an ephemeral source port for the outgoing connection.

	    preserve
		 Attempts to use the value of source-port for the outgoing connection, if specified. Otherwise
		 attempts to preserve the source port of the incoming connection.

	    preserve-strict
		 Forces the outgoing connection to use the value of source-port, if specified. Otherwise forces the
		 new connection to preserve the source port of the incoming connection. The system will fail to
		 create a new outgoing connection if the specified source port is already in use.

SEE ALSO
       create, delete, edit, glob, list, ltm virtual, modify, regex, tmsh, ltm message-routing sip route ltm message-
       routing sip profile session

COPYRIGHT
       No part of this program may be reproduced or transmitted in any form or by any means, electronic or
       mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
       other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.

       F5 Networks and BIG-IP (c) Copyright 2013-2016. All rights reserved.

BIG-IP						      2019-10-07	  ltm message-routing sip transport-config(1)