ltm monitor module-score¶

ltm monitor module-score(1) BIG-IP TMSH Manual ltm monitor module-score(1)

NAME
module-score - Configures a Module Score monitor that monitors the performance of a pool or node, rather than
the health of the pool or node.

MODULE
ltm monitor

SYNTAX
Configure the module-score component within the ltm monitor module using the syntax in the following sections.

CREATE/MODIFY
create module-score [name]
modify module-score [name]
options:
app-service [[string] | none]
debug [no | yes]
defaults-from [name]
description [string]
interval [integer]
pool [name]
snmp-community [none | [string] ]
snmp-ip-address [ [ip address] | none]
snmp-port [port]
snmp-version [string]
time-until-up [integer]
timeout [integer]
up-interval [integer]

edit module-score [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties

DISPLAY
list module-score
list module-score [ [ [name] | [glob] | [regex] ] ... ]
show module-score [ [ [name] | [glob] | [regex] ] ... ]
show running-config module-score
show running-config module-score [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
one-line
partition

DELETE
delete module-score [name]

Note: You cannot delete default monitors.

DESCRIPTION
You can use the module-score component to configure a custom monitor, or you can use the default Module Score
monitor that the Local Traffic Manager provides. This type of monitor enables global and local traffic
management systems to load balance in a proportional manner to local traffic management virtual servers
associated with the Web Accelerator(tm) and Application Security Manager modules. When you configure a Module
Score type of monitor, the local traffic management system uses SNMP to pull the gtm_score values from the
downstream virtual servers and set the dynamic ratios on the associated upstream local traffic management pool
members or nodes.

More specifically, the Module Score monitor retrieves the gtm_score values from the virtual server and the
gtm_vs_score values associated with the virtual server. Then, if a pool name is not specified, this monitor
sets the dynamic ratio on the node that is associated with the virtual server.

The BIG-IP(r) system uses the lowest non-zero value of the gtm_vs_score values to set the dynamic ratio. If
all gtm_vs_score values are zero, then the gtm_score value is used to set the dynamic ratios. If you specify a
pool name in the monitor definition, then the dynamic ratio is set on the pool member.

Note: If you want to distribute traffic to a cluster of WebAccelerator or Application Security Manager virtual
servers, you must create a separate custom Module Score monitor for each back-end Local Traffic Manager
system.

EXAMPLES
create module-score my_module-score defaults-from module_score

Creates a monitor named my_module-score that inherits properties from the default Module Score monitor.

list module-score

Displays the properties of all of the Module Score monitors.

OPTIONS
app-service
Specifies the name of the application service to which the monitor belongs. The default value is none.
Note: If the strict-updates option is enabled on the application service that owns the object, you cannot
modify or delete the monitor. Only the application service can modify or delete the monitor.

debug
Specifies whether the monitor sends error messages and additional information to a log file created and
labeled specifically for this monitor. You can use the log information to help diagnose and troubleshoot
unsuccessful health checks. The default value is no.

The options are:

no Specifies that the system does not redirect error messages and additional information related to
this monitor.

yes Specifies that the system redirects error messages and additional information to the
/var/log/monitors/--.log file.

defaults-from
Specifies the name of the monitor from which you want your custom monitor to inherit settings. The
default value is module_score.

description
User defined description.

glob Displays the items that match the glob expression. See help glob for a description of glob expression
syntax.

interval
Specifies, in seconds, the frequency at which the system issues the monitor check when either the
resource is down or the status of the resource is unknown. The default value is 10 seconds.

Important: F5 Networks recommends that when you configure this option and the up-interval option,
whichever value is greater be a multiple of the lesser value to allow for an even distribution of monitor
checks among all monitors.

name Specifies a unique name for the component. This option is required for the commands create, delete, and
modify.

partition
Displays the administrative partition within which the component resides.

pool Specifies a Local Traffic Manager pool name. Use this option if you want the system to set dynamic ratios
on a pool member instead of on the associated node for the pool member. The default value is none.

regex
Displays the items that match the regular expression. The regular expression must be preceded by an at
sign (@[regular expression]) to indicate that the identifier is a regular expression. See help regex for
a description of regular expression syntax.

snmp-community
Specifies the identifier for the SNMP community. The default value is public.

snmp-ip-address
Specifies the IP address of the SNMP server. The default value is none.

snmp-port
Specifies the port associated with the SNMP server. The default value is 161.

snmp-version
Specifies the SNMP version in use by the system. The default value is v2c.

time-until-up
Specifies the amount of time in seconds after the first successful response before a node is marked up. A
value of 0 (zero) causes a node to be marked up immediately after a valid response is received from the
node. The default value is 0 (zero).

timeout
Specifies the number of seconds the target has in which to respond to the monitor request. The default
value is 30 seconds.

If the target responds within the set time period, it is considered up. If the target does not respond
within the set time period, it is considered down. Also, if the target responds with a RESET packet, the
system immediately flags the target as down without waiting for the timeout interval to expire.

up-interval
Specifies, in seconds, the frequency at which the system issues the monitor check when the resource is
up. The default value is 0 (zero), which specifies that the system uses the value of the interval option
whether the resource is up or down.

Important: F5 Networks recommends that when you configure this option and the interval option, whichever
value is greater be a multiple of the lesser value to allow for an even distribution of monitor checks
among all monitors.

SEE ALSO
create, delete, edit, glob, list, modify, regex, show, tmsh

COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.

BIG-IP 2017-04-05 ltm monitor module-score(1)