ltm profile html
ltm profile html(1) BIG-IP TMSH Manual ltm profile html(1)
NAME
html - Configures an HTML profile.
MODULE
ltm profile
SYNTAX
Configure the html component within the ltm profile module using the syntax shown in the following sections.
CREATE/MODIFY
create html [name]
modify html [name]
options:
defaults-from [ [name] | none]
content-detection [disabled | enabled]
content-selection
[add | delete | replace-all-with] {
[content-type] ...
}
content-selection none
rules
[add | delete | replace-all-with] {
[html-rule] ...
}
rules none
mv html [ [[source-name] [destination-name]] | [[name] to-folder [folder-name]] | [[name...name] to-folder [folder-name]] ]
options:
to-folder
reset-stats html
reset-stats html [ [ [name] | [glob] | [regex] ] ... ]
DISPLAY
list html
list html [ [ [name] | [glob] | [regex] ] ... ]
show running-config html
show running-config html [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
one-line
partition
show html
show html [ [ [name] | [glob] | [regex] ] ... ]
options:
(default | exa | gig | kil | meg | peta | raw | tera | yotta | zetta)
field-fmt
global
DELETE
delete html [name]
DESCRIPTION
Use this command to create, modify, display, or delete an HTML profile with which you can manage HTML traffic.
EXAMPLES
create html my_html_profile defaults-from html
Creates a custom HTML profile named my_html_profile that inherits its settings from the system default HTML
profile.
list html
Displays the properties of all HTML profiles.
mv html /Common/my_html_profile to-folder /Common/my_folder
Moves a custom HTML profile named my_html_profile to a folder named my_folder, where my_folder has already
been created and exists within /Common.
Please refer to the mv manual page for examples on how to use the mv command.
OPTIONS
defaults-from
Specifies the profile that you want to use as the parent profile. Your new profile inherits all settings
and values from the parent profile specified. The default value is html.
description
User defined description.
glob Displays the items that match the glob expression. See help glob for a description of glob expression
syntax.
name Specifies a unique name for the component. This option is required for the commands create, delete, and
modify.
partition
Displays the administrative partition within which the component resides.
content-detection
Scans initial HTTP payload to look for HTML signatures and enables HTML profile if HTML-like patterns are
detected.
content-selection
Matches content-type from response header against a list of content-types and enables HTML profile if a
match is found.
rules
Specifies a list of HTML (content rewrite) rules, separated by spaces, that are used for parsing and
patching HTML.
to-folder
html profiles can be moved to any folder under /Common, but configuration dependencies may restrict
moving the profile out of /Common.
SEE ALSO
create, delete, glob, list, ltm virtual, modify, mv, reset-stats, show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008-2013, 2015. All rights reserved.
BIG-IP 2015-07-22 ltm profile html(1)