ltm profile mapt
ltm profile mapt(1) BIG-IP TMSH Manual ltm profile mapt(1)
NAME
map-t - Configures a MAP-T tunnel profile.
MODULE
net tunnels
SYNTAX
Configure the map-t component within the ltm profile module using the syntax in the following sections.
CREATE/MODIFY
create map-t [name]
modify map-t [name]
options:
app-service [[string] | none]
defaults-from [ [name] | none]
description [string]
ip6-prefix [ipv6 address/netmask]
ip4-prefix [ipv4 address/netmask]
ea-bits-length [integer]
port-offset [integer]
br-prefix [ipv6 address/netmask]
edit map-t [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
DISPLAY
list map-t
list map-t [ [ [name] | [glob] | [regex] ] ... ]
show running-config map-t
show running-config map-t [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
app-service
non-default-properties
one-line
partition
DELETE
delete map-t [ all | [name] ]
DESCRIPTION
You can use the map-t component to create a MAP-T profile that you associate with an LTM Virtual. A map-t
profile allows you to define NAT parameters which will allow legacy IPV4 servers to connect to an IPV6
network.
EXAMPLES
create map-t my_map
Creates a MAP-T profile called my_map.
list map-t all-properties
Displays all the properties of all the MAP-T profiles.
OPTIONS
app-service
Specifies the name of the application service to which the object belongs. The default value is none.
Note: If the strict-updates option is enabled on the application service that owns the object, you cannot
modify or delete the object. Only the application service can modify or delete the object.
defaults-from
Specifies the existing profile from which the system imports settings for the new profile. The default
value is mapt.
description
User defined description.
glob Displays the items that match the glob expression. See help glob for a description of glob expression
syntax.
name Specifies a unique name for the component. This option is required for the commands create and modify.
partition
Displays the administrative partition within which this component resides.
regex
Displays the items that match the regular expression. The regular expression must be preceded by an at
sign (@[regular expression]) to indicate that the identifier is a regular expression. See help regex for
a description of regular expression syntax.
ip6-prefix
Specifies the Rule IPv6 Prefix and netmask using CIDR notation, such as 2014::/48. The default prefix
length is 48.
ip4-prefix
Specifies the Rule IPv4 Prefix and netmask using CIDR notation, such as 192.0.0.0/8. The default prefix
length is 8.
ea-bits-length
Specifies the Rule EA (Embedded Address) Length of the MAP-T domain. The default is 40 (IPv4 32 bits +
PSID 8 bits).
port-offset
Specifies the port offset bits length of the MAP-T domain. The default is 6.
br-prefix
Specifies the BR (Border Relay) IPv6 prefix and netmask using CIDR notation, such as 2023::/96. The
default prefix length is 96.
psid Specify PSID value for MAPT. The default is zero.
draft-mode
Allow BIGIP to work with non rfc compliant CE devices which map BR prefix at a wrong offset. The default
is to disable draft mode.
br-pfx-ignore
Allow BIGIP to work with non rfc compliant CE devices which ignore BR prefix lengths. The default is to
disable.
SEE ALSO
create, delete, edit, glob, list, modify, net tunnels tunnel, regex, show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2011-2014, 2016. All rights reserved.
BIG-IP 2017-01-20 ltm profile mapt(1)