ltm profile radius
ltm profile radius(1) BIG-IP TMSH Manual ltm profile radius(1)
NAME
radius - Configures a RADIUS profile for network traffic load balancing.
MODULE
ltm profile
SYNTAX
Configure the radius component within the ltm profile module using the syntax shown in the following sections.
CREATE/MODIFY
create radius [name]
modify radius [name]
options:
app-service [[string] | none]
clients [add | delete | modify | replace-all-with] {
[ip address] ...
}
clients none
defaults-from [name]
description [string]
persist-avp [ [string] | [integer] | none]
pem-protocol-profile-radius [ [pem_protocol_profile_radius_name] | none]
subscriber-discovery [ disabled | enabled ]
mv radius [ [[source-name] [destination-name]] | [[name] to-folder [folder-name]] | [[name...name] to-folder [folder-name]] ]
options:
to-folder
edit radius [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
reset-stats radius
reset-stats radius [ [ [name] | [glob] | [regex] ] ... ]
DISPLAY
list radius
list radius [ [ [name] | [glob] | [regex] ] ... ]
show running-config radius
show running-config radius [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
one-line
partition
show radius
show radius [ [ [name] | [glob] | [regex] ] ... ]
options:
(default | exa | gig | kil | meg | peta | raw | tera | yotta | zetta)
field-fmt
global
DELETE
delete radius [name]
DESCRIPTION
You can use the radius component to manage RADIUS network traffic.
EXAMPLES
create radius my_radius_server
Creates a RADIUS profile named my_radius_server that inherits its settings from the system default RADIUS
profile.
delete radius my_radius_server
Deletes the RADIUS profile named my_radius_server.
mv radius /Common/my_radius_profile to-folder /Common/my_folder
Moves a custom radius profile named my_radius_profile to a folder named my_folder, where my_folder has already
been created and exists within /Common.
OPTIONS
app-service
Specifies the name of the application service to which the profile belongs. The default value is none.
Note: If the strict-updates option is enabled on the application service that owns the object, you cannot
modify or delete the profile. Only the application service can modify or delete the profile.
clients
Specifies host and network addresses from which clients can connect. The default value is none, which
indicates that any client can connect.
defaults-from
Specifies the profile that you want to use as the parent profile. Your new profile inherits all settings
and values from the parent profile. The default value is radiusLB.
description
User defined description.
glob Displays the items that match the glob expression. See help glob for a description of glob expression
syntax.
name Specifies a unique name for the component. This option is required for the commands create, delete, and
modify.
partition
Displays the administrative partition within which the component resides.
pem-protocol-profile-radius
Specifies PEM protocol profile to be used when subscriber discovery is enabled. PEM protocol profile
defines mapping of RADIUS AVPs to subscriber ID and other PEM subscriber session attributes.
persist-avp
Specifies the name of the RADIUS attribute on which traffic persists. Acceptable values are ASCII strings
from section 5 of RFC 2865 or numeric codes (1-255). The default value is none, which indicates that
persistence is disabled.
regex
Displays the items that match the regular expression. The regular expression must be preceded by an at
sign (@[regular expression]) to indicate that the identifier is a regular expression. See help regex for
a description of regular expression syntax.
subscriber-discovery
Specifies whether to enable PEM subscriber discovery based on the content of RADIUS packets. The options
are disabled and enabled. The default value is disabled, which indicates that it will not extract
subscriber information from RADIUS packets.
to-folder
radius profiles can be moved to any folder under /Common, but configuration dependencies may restrict
moving the profile out of /Common.
SEE ALSO
create, delete, edit, glob, list, ltm virtual, modify, mv, regex, reset-stats, show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008-2010, 2012-2013, 2016. All rights reserved.
BIG-IP 2016-03-14 ltm profile radius(1)