ltm profile response-adapt

ltm profile response-adapt(1)			  BIG-IP TMSH Manual			ltm profile response-adapt(1)

NAME
       response-adapt - Configures a HTTP response adaptation profile.

MODULE
       ltm profile

SYNTAX
       Configure the response-adapt component within the ltm profile module using the syntax shown in the following
       sections.

   CREATE/MODIFY
	create response-adapt [name]
	modify response-adapt [name]
	  options:
	    defaults-from [ [name] | none]
	    enabled [ yes | no ]
	    internal-virtual [ [name] | none]
	    preview-size [integer]
	    service-down-action [ ignore | reset | drop ]
	    timeout [integer]
	    allow-http-10 [ yes | no ]

	edit response-adapt [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    all-properties
	    non-default-properties

	mv response-adapt [ [[source-name] [destination-name]] | [[name] to-folder [folder-name]] | [[name...name] to-folder [folder-name]] ]
	  options:
	    to-folder

	reset-stats response-adapt
	reset-stats response-adapt [ [ [name] | [glob] | [regex] ] ... ]

   DISPLAY
	list response-adapt
	list response-adapt [ [ [name] | [glob] | [regex] ] ... ]
	show running-config response-adapt
	show running-config response-adapt [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    all-properties
	    non-default-properties
	    one-line
	    partition

	show response-adapt
	show response-adapt [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    (default | exa | gig | kil | meg | peta | raw | tera | yotta | zetta)
	    field-fmt

   DELETE
	delete response-adapt [name]

DESCRIPTION
       You can use the response-adapt component to manage a HTTP response adaptation profile.

EXAMPLES
       create response-adapt my_req_adapt defaults-from response-adapt

       Creates a HTTP response adaptation profile named my_req_adapt using the system defaults.

       create response-adapt my_req_adapt { enabled yes }

       Creates a HTTP response adaptation profile named my_req_adapt that is enabled for adapting HTTP responses.

       mv response-adapt /Common/my_responseadapt_profile to-folder /Common/my_folder

       Moves a custom responseadapt profile named my_responseadapt_profile to a folder named my_folder, where
       my_folder has already been created and exists within /Common.

       defaults-from
	    Specifies the profile that you want to use as the parent profile. Your new profile inherits all of the
	    settings and values from the specified parent profile. The default value is responseadapt.

       enabled
	    Enables adaptation of HTTP responses. If set to yes, HTTP responses will be forwarded to the specified
	    internal virtual server for adaptation. The default value is yes.

       internal-virtual
	    Specifies the name of the internal virtual server to use for adapting the HTTP response.

       preview-size
	    Specifies the maximum size of the preview buffer. The preview buffer is used to hold a copy of the HTTP
	    response header and data sent to the internal virtual server in case the adaptation server reports that
	    it does not need to adapt the HTTP response. Setting the preview-size to 0, disables buffering the
	    response and should only be done if the adaptation server will always return with a modified HTTP
	    response or the original HTTP response. The default value is 1024.

       service-down-action
	    Specifies the action to take if the internal virtual server does not exist or returns an error. The
	    default value is ignore.

	    The options are:

	    ignore
		 Ignore the error and send the unmodified HTTP response to a HTTP server selected from this virtual
		 server's pool.

	    drop Drop the connection.

	    reset
		 Reset the connection.

       timeout
	    Specifies a timeout in milliseconds. If the internal virtual server does not return a result within the
	    specified time, a timeout error will occur. If preview-size is 0, the countdown will start after the
	    entire content has been sent for adaptation. A 0 value disables the timeout. The default value is 0.

       to-folder
	    response-adapt profiles can be moved to any folder under /Common, but configuration dependencies may
	    restrict moving the profile out of /Common.

       allow-http-10
	    Specifies whether to forward HTTP version 1.0 responses for adaptation. By default only HTTP version 1.1
	    responses are forwarded. Version 1.0 is not supported. While it should work in most cases, it might be
	    necessary to restrict adaptation on a site-specific basis. The default value is no.

SEE ALSO
       create, delete, edit, glob, list, ltm virtual, modify, mv, regex, reset-stats, show, tmsh, ltm profile
       request-adapt

COPYRIGHT
       No part of this program may be reproduced or transmitted in any form or by any means, electronic or
       mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
       other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.

       F5 Networks and BIG-IP (c) Copyright 2012-2013, 2015. All rights reserved.

BIG-IP						      2017-05-24			ltm profile response-adapt(1)