ltm profile rtsp
ltm profile rtsp(1) BIG-IP TMSH Manual ltm profile rtsp(1)
NAME
rtsp - Configures an RTSP (realtime streaming protocol) profile.
MODULE
ltm profile
SYNTAX
Configure the rtsp component within the ltm profile module using the syntax shown in the following sections.
CREATE/MODIFY
create rtsp [name]
modify rtsp [name]
options:
app-service [[string] | none]
check-source [disabled | enabled]
defaults-from [name]
description [string]
idle-timeout [integer]
max-header-size [integer]
max-queued-data [integer]
multicast-redirect [disabled | enabled]
proxy [external | internal | none]
proxy-header [ [name] | none]
real-http-persistence [disabled | enabled]
rtcp-port [number]
rtp-port [number]
session-reconnect [disabled | enabled]
unicast-redirect [disabled | enabled]
log-publisher [log publisher name | none]
log-profile [log profile name | none]
edit rtsp [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
mv rtsp [ [[source-name] [destination-name]] | [[name] to-folder [folder-name]] | [[name...name] to-folder [folder-name]] ]
options:
to-folder
reset-stats rtsp
reset-stats rtsp [ [ [name] | [glob] | [regex] ] ... ]
DISPLAY
list rtsp
list rtsp [ [ [name] | [glob] | [regex] ] ... ]
show running-config rtsp
show running-config rtsp
[ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
one-line
partition
show rtsp
show rtsp [ [ [name] | [glob] | [regex] ] ... ]
options:
(default | exa | gig | kil | meg | peta | raw | tera | yotta | zetta)
field-fmt
global
DELETE
delete rtsp [name]
DESCRIPTION
You can use the rtsp component to manage a profile that you use to control RTSP traffic.
EXAMPLES
create rtsp my_rtsp_profile defaults-from rtsp
Creates a custom RTSP profile named my_rtsp_profile that inherits its settings from the system default RTSP
profile.
list rtsp all-properties
Displays all properties for all RTSP profiles.
mv rtsp /Common/my_rtsp_profile to-folder /Common/my_folder
Moves a custom rtsp profile named my_rtsp_profile to a folder named my_folder, where my_folder has already
been created and exists within /Common.
OPTIONS
app-service
Specifies the name of the application service to which the profile belongs. The default value is none.
Note: If the strict-updates option is enabled on the application service that owns the object, you cannot
modify or delete the profile. Only the application service can modify or delete the profile.
check-source
When enabled the system uses the source attribute in the transport header to establish the target address
of the RTP stream, and before the response is forwarded to the client, updates the value of the source
attribute to be the virtual address of the BIG-IP system. When disabled the system does not change the
source attribute. The default value is enabled.
defaults-from
Specifies the profile that you want to use as the parent profile. Your new profile inherits all of the
settings and values from the specified parent profile. The default value is rtsp.
description
User defined description.
glob Displays the items that match the glob expression. See help glob for a description of glob expression
syntax.
idle-timeout
Specifies the number of seconds that a connection is idle before the connection is eligible for deletion.
The default value is 300 seconds.
max-header-size
Specifies the maximum size of an RTSP request or response header that the RTSP filter accepts before
dropping the connection. The default value is 4096 bytes.
max-queued-data
Specifies the maximum amount of data that the RTSP filter buffers before dropping the connection. The
default value is 32768 bytes.
multicast-redirect
Specifies whether to enable or disable multicast redirect. When enabled, the client can select the
destination to which to stream data. The default value is disabled.
name Specifies a unique name for the component. This option is required for the commands create, delete, and
modify.
partition
Displays the administrative partition within which the component resides.
proxy
Specifies whether the RTSP filter is associated with an RTSP proxy configuration. The default value is
none.
proxy-header
When the proxy option is set, specifies the name of the header in the RTSP proxy configuration that is
passed from the client-side virtual server to the server-side virtual server. Note that the name of the
header must begin with X-. The default value is none.
To use the proxy-header option, you must specify a value for the proxy option.
real-http-persistence
Specifies whether to enable or disable real HTTP persistence. When enabled, the RTSP filter automatically
persists Real Networks RTSP over HTTP using the RTSP port. The default value is enabled. If you disable
this parameter, you can override the default behavior with an iRule.
regex
Displays the items that match the regular expression. The regular expression must be preceded by an at
sign (@[regular expression]) to indicate that the identifier is a regular expression. See help regex for
a description of regular expression syntax.
rtcp-port
Specifies the number of the port to use for the Real Time Control Protocol (RTCP) service. The default
value is 0 (zero). RTCP allows monitoring of real-time data delivery.
rtp-port
Specifies the number of the port to use for the RTP service. The default value is 0 (zero).
session-reconnect
Specifies whether to enable or disable session reconnect. When enabled, the RTSP filter persists the
control connection, which is being resumed, to the correct server. The default value is disabled.
to-folder
rtsp profiles can be moved to any folder under /Common, but configuration dependencies may restrict
moving the profile out of /Common.
unicast-redirect
Specifies whether to enable or disable unicast redirect. When enabled, the client can select the
destination to which to stream data. The default value is disabled.
log-publisher
Specify the name of the log publisher which logs translation events. See help sys log-config for more
details on the logging sub-system. Use the "sys log-config publisher" component to set up a log
publisher.
log-profile
Specify the name of the ALG log profile which controls the logging of ALG . See help ltm alg-log-profile
for more details on the logging profile sub-system. Use the "ltm alg-log-profile profile" component to
set up a ALG log profile.
SEE ALSO
create, delete, edit, glob, list, ltm virtual, modify, mv, regex, reset-stats, show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008-2010, 2012-2013, 2015-2016. All rights reserved.
BIG-IP 2016-03-14 ltm profile rtsp(1)