ltm profile smtps
ltm profile smtps(1) BIG-IP TMSH Manual ltm profile smtps(1)
NAME
smtps - Configures an SMTPs profile.
MODULE
ltm profile
SYNTAX
Configure the smtps component within the ltm profile module using the syntax shown in the following sections.
The smtps profile is available when the asm module is enabled. You enable the asm module via provisioning
commands, which are described in help sys provision.
CREATE/MODIFY
create smtps [name]
modify smtps [name]
options:
app-service [[string] | none]
defaults-from [ [name] | none]
description [string]
activation-mode [ none | allow | require ]
edit smtps [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
DISPLAY
list smtps
list smtps [ [ [name] | [glob] | [regex] ] ... ]
show running-config smtps
show running-config smtps [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
DELETE
delete smtps [name]
DESCRIPTION
You can use the smtps component to create, modify, display, or delete an SMTPs profile with which you can
manage SMTPs traffic.
EXAMPLES
create smtps my_smtps_profile defaults-from smtps
Creates a custom SMTPs profile named my_smtps_profile that inherits its settings from the system default SMTPs
profile.
list smtps
Displays the properties of all SMTPs profiles.
OPTIONS
app-service
Specifies the name of the application service to which the profile belongs. The default value is none.
Note: If the strict-updates option is enabled on the application service that owns the object, you cannot
modify or delete the profile. Only the application service can modify or delete the profile.
defaults-from
Specifies the profile that you want to use as the parent profile. Your new profile inherits all settings
and values from the parent profile specified. The default value is smtp.
description
User defined description.
glob Displays the items that match the glob expression. See help glob for a description of glob expression
syntax.
name Specifies a unique name for the component. This option is required for the commands create, delete, and
modify.
regex
Displays the items that match the regular expression. The regular expression must be preceded by an at
sign (@[regular expression]) to indicate that the identifier is a regular expression. See help regex for
a description of regular expression syntax.
activation-mode
Sets the activation-mode for STARTTLS. The options are NONE, ALLOW, or REQUIRE. The default value is
NONE.
SEE ALSO
create, delete, edit, glob, list, ltm virtual, modify, regex, reset-stats, show, sys provision, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2012-2013. All rights reserved.
BIG-IP 2013-11-19 ltm profile smtps(1)