ltm rule command UDP max rate
iRule(1) BIG-IP TMSH Manual iRule(1)
UDP::max_rate
This command can be used to set/get the maximum transmission rate (bytes per second) of a UDP connection.
SYNOPSIS
UDP::max_rate (UDP_MAX_RATE)?
DESCRIPTION
UDP::max_rate returns the maximum transmission rate (bytes per second) of a UDP connection. UDP::max_rate
UDP_MAX_RATE sets the maximum transmission rate (bytes per second) to specified value. UDP::max_rate 0 turns
off the maximum transmission rate (bytes per second) of a previously specified value.
RETURN VALUE
UDP::max_rate returns the maximum transmission rate (bytes per second) of a UDP connection.
VALID DURING
ANY_EVENT
EXAMPLES
# Get/set the max rate of the UDP flow.
when CLIENT_ACCEPTED {
# Set the rate to 1Mbps (125,000 bytes per second)
log local0. "UDP set max rate: [UDP::max_rate 125000]"
log local0. "UDP get max rate: [UDP::max_rate]"
}
HINTS
SEE ALSO
CHANGE LOG
@BIGIP-14.0.0
--first introduce the command.
BIG-IP 2020-06-23 iRule(1)