net bwc priority-group
net bwc priority-group(1) BIG-IP TMSH Manual net bwc priority-group(1)
NAME
priority-group - Configures a bandwidth control policy for traffic flow.
MODULE
net bwc
SYNTAX
Configure the priority-group component within the net bwc module using the syntax in the following sections.
CREATE/MODIFY
create priority-group [name]
modify priority-group [name]
options:
app-service [[string] | none]
description [string]
priority-classes [none] {
description [string]
weight-percentage [integer]
}
edit priority-group [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
DISPLAY
list priority-group
list priority-group [ [ [name] | [glob] | [regex] ] ... ]
show running-config net bwc priority-group
show running-config net bwc priority-group [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
one-line
DELETE
delete net bwc priority-group [all | [name] ]
DESCRIPTION
You can use the net bwc priority-group to create a bandwidth traffic group policy to handle traffic flow, and
then associate it with bwc component such as bwc policy/category.
EXAMPLES
create net bwc priority-group
Creates a bwc policy (see below).
list net bwc priority-group all-properties
Displays all of the properties of all of the bwc policies.
delete net bwc priority-group
Deletes a bwc traffic group (see below).
Example for dynamic policy:
net bwc priority-group tc-GOLD {
priority-classes {
tc-BLUE {
weight-percentage 30
}
tc-RED {
weight-percentage 20
}
}
}
app-service
Specifies the name of the application service to which the object belongs. The default value is none.
Note: If the strict-updates option is enabled on the application service that owns the object, you cannot
modify or delete the object. Only the application service can modify or delete the object.
name Specifies a unique name for the policy. This option is required for the commands create, delete, and
modify.
description
User defined description.
weight-percentage
Specifies the percentage of maximum bandwidth that traffic is allowed during congestion using the traffic
class associated. The valid range is 5-100.
iRule
Please refer to iRule documentation for iRule to use bandwidth control policy.
SEE ALSO
create, delete, edit, glob, list, modify, regex, show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2011-2014. All rights reserved.
BIG-IP 2016-05-18 net bwc priority-group(1)