net dag-globals
net dag-globals(1) BIG-IP TMSH Manual net dag-globals(1)
NAME
dag-globals - configure global disaggregation settings.
MODULE
net
SYNTAX
Configure the dag-globals component within the net module using the syntax shown in the following sections.
MODIFY
modify dag-globals
options:
round-robin-mode [global | local]
dag-ipv6-prefix-len [integer]
icmp-hash [icmp | ipicmp]
icmp-monitor-priority [high | normal]
edit dag-globals
options:
all-properties
non-default-properties
DISPLAY
list dag-globals
show running-config dag-globals
options:
all-properties
non-default-properties
one-line
DESCRIPTION
Provides the ability to configure global disaggregation settings.
round-robin-mode
Specifies whether the round robin disaggregator (DAG) on a blade can disaggregate packets to all the TMMs
in the system or only to the TMMs local to the blade.
dag-ipv6-prefix-len
Specifies whether SPDAG or IPv6 prefix DAG should be used to disaggregate IPv6 traffic when vlan cmp hash
is set to src-ip or dst-ip. The default value is 128, using SPDAG.
icmp-hash
Specifies ICMP hash for ICMP echo request and ICMP echo reply in SW DAG. ICMP echo request and ICMP echo
reply can be disaggregated based on ICMP id or ICMP id and IP addresses. The default ICMP hash is ICMP
id.
icmp-monitor-priority
Specifies the priority for ICMP monitor traffic. The default value is normal.
SEE ALSO
list, modify, show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008-2010, 2013-2015. All rights reserved.
BIG-IP 2018-05-09 net dag-globals(1)