net tunnels ppp
net tunnels ppp(1) BIG-IP TMSH Manual net tunnels ppp(1)
NAME
ppp - Configures a PPP profile.
MODULE
net tunnels
SYNTAX
Configure the ppp component within the net tunnels module using the syntax in the following sections.
CREATE/MODIFY
create ppp [name]
modify ppp [name]
options:
app-service [[string] | none]
defaults-from [ [name] | none]
description [string]
lcp-echo-failure [integer]
lcp-echo-interval [integer]
vj [disabled | enabled]
edit ppp [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
DISPLAY
list ppp
list ppp [ [ [name] | [glob] | [regex] ] ... ]
show running-config ppp
show running-config ppp [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
app-service
non-default-properties
one-line
partition
DELETE
delete ppp [ all | [name] ]
DESCRIPTION
You can use the ppp component to create a ppp profile that you associate with a tunnel using the tunnel
component. For more information about creating a tunnel see net tunnel.
EXAMPLES
create ppp my_ppp
Creates a PPP profile called my_ppp.
list ppp all-properties
Displays all the properties of all the PPP profiles.
OPTIONS
app-service
Specifies the name of the application service to which the object belongs. The default value is none.
Note: If the strict-updates option is enabled on the application service that owns the object, you cannot
modify or delete the object. Only the application service can modify or delete the object.
defaults-from
Specifies the existing profile from which the system imports settings for the new profile. The default
value is ppp.
description
User defined description.
glob Displays the items that match the glob expression. See help glob for a description of glob expression
syntax.
lcp-echo-failure
Specifies the number of consecutive PPP LCP echo messages that must go unanswered for the server to drop
PPP connection. For example, if the server sends number of consecutive PPP LCP Echo Request messages that
go unanswered (by Echo Reply), it will close the PPP connection. The default value is 4.
lcp-echo-interval
Specifies the interval, in seconds, between the PPP LCP Echo Request messages that the server sends to
the peer (client). The default value is 30.
name Specifies a unique name for the component. This option is required for the commands create and modify.
partition
Displays the administrative partition within which this component resides.
regex
Displays the items that match the regular expression. The regular expression must be preceded by an at
sign (@[regular expression]) to indicate that the identifier is a regular expression. See help regex for
a description of regular expression syntax.
vj Specifies whether the system uses Van Jacobson Header Compression (also known as VJ compression, or just
Header Compression), which is an option in most versions of PPP. VJ is a data compression protocol
described in RFC 1144, specifically designed by Van Jacobson to improve TCP/IP performance over slow
serial links. The default value is disabled.
SEE ALSO
create, delete, edit, glob, list, modify, net tunnels tunnel, regex, show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2011-2013. All rights reserved.
BIG-IP 2014-05-16 net tunnels ppp(1)