net tunnels tunnel
net tunnels tunnel(1) BIG-IP TMSH Manual net tunnels tunnel(1)
NAME
tunnel - Configures a tunnel.
MODULE
net tunnels
SYNTAX
Configure the tunnel component within the net tunnels module using the syntax in the following sections.
CREATE/MODIFY
create tunnel [name]
modify tunnel [name]
options:
app-service [[string] | none]
auto-lasthop [default | enabled | disabled ]
description [string]
local-address [ip address]
secondary-address [ip address]
mode [bidirectional | inbound | outbound]
mtu [integer]
use-pmtu [enabled | disabled ]
profile [name]
remote-address [ip address]
traffic-group [[traffic group] | none]
tos [integer]
transparent [enabled | disabled ]
idle-timeout [integer]
key [integer]
edit tunnel [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
DISPLAY
list tunnel
list tunnel [ [ [name] | [glob] | [regex] ] ... ]
show running-config tunnel
show running-config tunnel [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
app-service
non-default-properties
one-line
partition
DELETE
delete tunnel [ all | [name] ]
DESCRIPTION
You can use the tunnel component to configure a tunnel.
EXAMPLES
create tunnel my_tunnel local-address 10.10.10.1 remote-address 11.11.11.1 profile gre
Creates a tunnel named my_tunnel between the local IP address 10.10.10.1 and the remote IP address 11.11.11.1.
list tunnel all-properties
Displays all of the properties of all of the tunnels.
OPTIONS
app-service
Specifies the name of the application service to which the object belongs. The default value is none.
Note: If the strict-updates option is enabled on the application service that owns the object, you cannot
modify or delete the object. Only the application service can modify or delete the object.
auto-lasthop
When enabled, specifies that the system returns packets to the MAC address from which they were sent. The
default setting is default, which specifies that the system uses the default route to send back the
request.
description
User defined description.
glob Displays the items that match the glob expression. See help glob for a description of glob expression
syntax.
if-index
Displays the index assigned to this tunnel. It is a unique identifier assigned for all objects displayed
in the SNMP IF-MIB.
local-address
Specifies a local IP address. This option is required.
secondary-address
Specifies a secondary non-floating IP address when the local-address is set to a floating address.
Currently this setting is supported by NVGRE tunnels only.
mode Specifies how the tunnel carries traffic. The default value is bidirectional.
mtu Specifies the maximum transmission unit (MTU) of the tunnel. The default value is 0. When the MTU is set
to the default value (of 0), the MTU of the tunnel is computed by the system and is set to the MTU size
of the underlying interface minus the encapsulation overhead introduced by the tunneling protocol. The
valid range is 0 - 65535.
use-pmtu
Enables or disables the tunnel to use the PMTU (Path MTU) information provided by ICMP NeedFrag error
messages. If enabled and the tunnel MTU is set to 0, the tunnel will use the PMTU information. If enabled
and the tunnel MTU is fixed to a non-zero value, the tunnel will use the minimum of PMTU and MTU. If
disabled, the tunnel will use fixed MTU, or calculate its MTU using tunnel encapsulation configurations.
name Specifies a unique name for the component. This option is required for the commands create, and modify.
partition
Displays the administrative partition within which the component resides.
profile
Specifies the profile that you want to associate with the tunnel. This option is required for the create
command.
regex
Displays the items that match the regular expression. The regular expression must be preceded by an at
sign (@[regular expression]) to indicate that the identifier is a regular expression. See help regex for
a description of regular expression syntax.
remote-address
Specifies a remote IP address. This value is required for the commands create and modify.
traffic-group
Specifies a traffic-group for use with the tunnel. Traffic group determines the ConfigSync behavior of
the tunnel object.
tos Specifies a value for insertion into the Type of Service (ToS) octet within the IP header of the
encapsulating header of transmitted packets. The default value is preserve. The possible values are 0
(zero) - 255.
transparent
Enables or disables the tunnel to be transparent. If enabled, the user can inspect and/or manipulate the
encapsulated traffic flowing through the BIG-IP. A transparent tunnel terminates a tunnel while
presenting the illusion that the tunnel transits the device unperturbed i.e. the BIG-IP appears like an
intermediate router that simply routes IP traffic through the device. The default value is disabled.
idle-timeout
Specifies an idle timeout for wildcard tunnels in seconds. This setting specifies the number of seconds
that a wildcard tunnel connection is idle before the connection is eligible for deletion. The default
value is 300 seconds.
key The key field may represent different values depending on the type of the tunnel. For VXLAN it represents
the Virtual Network Identifier (VNI). The default value is 0.
SEE ALSO
create, delete, edit, glob, list, modify, net tunnels gre, net tunnels ipip, net tunnels wccp, regex, show,
tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008-2013, 2016. All rights reserved.
BIG-IP 2016-03-14 net tunnels tunnel(1)