pem stats action
pem stats action(1) BIG-IP TMSH Manual pem stats action(1)
NAME
action - Displays and resets PEM policy action statistics.
MODULE
pem stats
SYNTAX
Display statistics for the action component within the pem stats module using the syntax in the following
section.
DISPLAY
show action
option:
(default | exa | gig | kil | meg | peta | raw | tera | yotta | zetta)
DESCRIPTION
You can use the action component to display PEM policy action statistics. The statistics details are described
below:
Pass Specifies the number of flows that are passed (gate enabled).
Drop Specifies the number of flows that are dropped (gate disabled).
Clone
Specifies the number of flows to which clone actions apply.
HTTP Redirect
Specifies the number of flows to which redirection actions apply.
ICAP Request
Specifies the number of flows to which ICAP actions apply on the request direction.
ICAP Response
Specifies the number of flows to which ICAP actions apply on the response direction.
Steering
Specifies the number of flows to which steering actions apply.
Service Chain
Specifies the number of flows to which steering endpoint actions apply.
Steering on Response
Specifies the number of flows to which steering actions apply on the response direction.
QoS Uplink
Specifies the number of uplink flows to which QoS actions apply. Uplink means to network.
QoS Downlink
Specifies the number of downlink flows to which QoS actions apply. Downlink means to subscriber.
DSCP Marking Uplink
Specifies the number of uplink flows with DSCP action applies.
DSCP Marking Downlink
Specifies the number of downlink flows with DSCP action applies.
HTTP Headers Modify
Specifies the number of HTTP Headers Modify actions.
Insert Content
Specifies the number of Insert Content actions.
iRule
Specifies the number of iRule actions.
L2 Marking Uplink
Specifies the number of uplink flows to which L2 Marking actions apply.
L2 Marking Downlink
Specifies the number of downlink flows to which L2 Marking actions apply.
Flow Reporting
Specifies the number of actions of flow reporting record generation applied.
Session Reporting
Specifies the number of actions of session record generation applied.
Transaction Reporting
Specifies the number of actions of transaction record generation applied.
Policy Re-evaluation Rate (count/min)
Specifies the number of successful policy reevaluations per minute.
Policy Re-evaluation Rate Maximum
Specifies the maximum number of policy reevaluations overall for all subscribers and flows.
You can reset the PEM policy action statistics using reset-stats command.
EXAMPLES
show action
Displays the PEM policy action statistics.
reset-stats action
Resets the PEM policy action statistics.
OPTIONS
For information about the options that you can use with the command show, see help show.
SEE ALSO
show, pem stats gx, pem stats gy, pem stats hsl, pem stats radius, pem stats subscriber, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2009-2013, 2016. All rights reserved.
BIG-IP 2018-11-02 pem stats action(1)