sys appiq config
sys appiq config(1) BIG-IP TMSH Manual sys appiq config(1)
NAME
config - Configures this BIG-IP for AppIQ feature.
MODULE
sys appiq
SYNTAX
Automatically configures AppIQ feature on this box with given ECM host IP.
MODIFY
modify config
options:
host-ip [ip address]
DISPLAY
list config
options:
all-properties
DESCRIPTION
When run for the first time, this command automatically creates necessary configuration objects to establish
communication between BIG-IP and ECM cluster. The command can be reused to change the configured host IP of
the ECM cluster.
OPTIONS
host-ip
Specifies an IPv4/6 address for the ECM host. By default, this value is "any6" and AppIQ is disabled.
Upon setting this value, the feature is enabled.
User can later delete automatically created and configured AppIQ logging profiles under System
configuration to disable the feature. Please note that the command needs to be re-run to enable the
feature if the configuration is manually removed/changed.
SEE ALSO
list, modify, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008-2016. All rights reserved.
BIG-IP 2016-11-30 sys appiq config(1)