sys crypto server
sys crypto server(1) BIG-IP TMSH Manual sys crypto server(1)
NAME
server - Manage remote crypto servers.
MODULE
sys crypto
SYNTAX
Manage crypto servers using the syntax in the following section.
CREATE/MODIFY
create server [name]
modify server [name]
options:
addr [ip address]
clients [add | delete | replace-all-with] { [ip_addr/prefixlen ...] }
clients [none]
[disabled | enabled]
port [integer]
profiles [add | delete | replace-all-with] { [profile_name ...] }
profiles [none]
DISPLAY
list server
list server [ [ [name] | [globl] | [regex] ] ... ]
show server
show server [ [ [name] | [globl] | [regex] ] ... ]
DELETE
delete server [name]
DESCRIPTION
You can use the server component to manage remote crypto servers.
EXAMPLES
create server example addr 10.1.1.1 port 12100 profiles add { clientssl tcp }
Creates a remote crypto server named "example" that will listen for remote crypto clients on IP address
"10.1.1.1" and port "12100". The remote crypto server will use SSL over a TCP connection to communicate with
remote crypto clients.
OPTIONS
addr Specifies the IP address of the remote crypto server.
clients
Specifies a list of allowed client IP addresses and subnets. An empty list allows all clients.
(enabled | disabled)
Specifies the state of the remote crypto server. The default value is enabled.
port Specifies the port used by the remote crypto server.
profiles
Specifies a list of profiles that the remote crypto server will use to communicate with remote crypto
clients.
SEE ALSO
create, delete, glob, list, modify, regex, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2013-2014, 2016. All rights reserved.
BIG-IP 2016-03-14 sys crypto server(1)