sys daemon-ha
sys daemon-ha(1) BIG-IP TMSH Manual sys daemon-ha(1)
NAME
daemon-ha - Configures high availability for a BIG-IP(r) system.
MODULE
sys
SYNTAX
Configure the daemon-ha component within the sys module using the syntax in the following sections.
MODIFY
modify daemon-ha [name]
options:
heartbeat [enabled | disabled]
heartbeat-action [go-offline | go-offline-downlinks-restart |
go-offline-restart | reboot | restart | restart-all]
running [enabled | disabled]
edit daemon-ha [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
DISPLAY
list daemon-ha
list daemon-ha [ [ [name] | [glob] | [regex] ] ... ]
show running-config daemon-ha
show running-config daemon-ha [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
not-running-action
one-line
running-timeout
DESCRIPTION
You can use the daemon-ha component to configure the daemons on the system that handle high availability for
the BIG-IP system.
EXAMPLES
modify daemon-ha bigd running disabled
Disables the bigd daemon.
list daemon-ha bigd running-timeout
Displays the running timeout of the bigd daemon.
OPTIONS
glob Displays the items that match the glob expression. See help glob for a description of glob expression
syntax.
heartbeat
Specifies whether heartbeat monitoring is enabled for the specified daemon. If monitoring is enabled and
the daemon does not maintain its heartbeat the action specified by the value of the heartbeat-action
option is taken.
The default value is enabled for all daemons, except the named daemon, which is disabled by default.
heartbeat-action
Specifies the action the system takes if the specified daemon does not maintain its heartbeat.
The default value is dependent on the specified daemon, the most common default value is restart.
name Specifies a unique name for the component. This option is required for the command modify.
not-running-action
Specifies the action that the system takes if the daemon is not running. This option is read-only.
The default value is dependent on the specified daemon, the most common default value is go-offline-
downlinks.
regex
Displays the items that match the regular expression. The regular expression must be preceded by an at
sign (@[regular expression]) to indicate that the identifier is a regular expression. See help regex for
a description of regular expression syntax.
running
Specifies whether the running-timeout and non-running-action options are enabled. The default value is
dependent on the specified daemon, the most common default value is enabled.
Note: This feature is implemented only for the daemons: tmm, mcpd, bcm56xxd, bigd, gtmd, clusterd,
tmrouted, bd, datasyncd and tmrouted.
running-timeout
Specifies the amount of time (in seconds) that must elapse before the specified daemon is considered to
be not running. This option is read-only.
The default value is dependent on the specified daemon.
SEE ALSO
edit, glob, list, modify, regex, show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2009-2010, 2013. All rights reserved.
BIG-IP 2014-02-07 sys daemon-ha(1)