sys fpga firmware-config
sys fpga firmware-config(1) BIG-IP TMSH Manual sys fpga firmware-config(1)
NAME
firmware-config - Configures the FPGA firmware to be used by the system.
MODULE
sys fpga
SYNTAX
Configure the firmware-config component within the sys fpga module using the syntax shown in the following
sections.
MODIFY
modify firmware-config
options:
type [ l4-performance-fpga | l7-intelligent-fpga | standard-balanced-fpga | traffic-acceleration-fpga ]
DISPLAY
list firmware-config
options:
all-properties
non-default-properties
one-line
DESCRIPTION
You can use the firmware-config component to configure the PFGA firmware type to use.
EXAMPLES
list firmware-config
Displays properties of the current FPGA firmware configuration.
modify firmware-config type
Modify the type of the current FPGA firmware configuration. The default is standard-balanced-fpga.
OPTIONS
type The type for FPGA firmware current used on the system.
l4-performance-fpga: High throughput fpga firmware. l7-intelligent-fpga: eFAD and L7 intelligent fpga
firmware. standard-balanced-fpga: The balanced standard fpga firmware. traffic-acceleration-fpga:
traffic acceleration fpga firmware.
SEE ALSO
list, modify, tmsh, fpga
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008, 2012-2014. All rights reserved.
BIG-IP 2016-10-10 sys fpga firmware-config(1)