sys management-route
sys management-route(1) BIG-IP TMSH Manual sys management-route(1)
NAME
management-route - Configures route settings for the management interface (MGMT).
MODULE
sys
SYNTAX
Configure the management-route component within the sys module using the syntax in the following sections.
CREATE/MODIFY
create management-route [name | default | default-inet6]
options:
description [string]
gateway [ip address]
mtu [number]
network [ip address/netmask]
type [interface | blackhole]
modify management-route [name | default | default-inet6]
options:
description [string]
gateway [ip address]
mtu [number]
type [interface | blackhole]
edit management-route [ [ [name | default | default-inet6]
| [glob] | [regex] ] ... ]
options:
all-properties
DISPLAY
list management-route
list management-route [ [ [name | default | default-inet6]
| [glob] | [regex] ] ... ]
show running-config management-route
show running-config management-route [ [ [name | default
| default-inet6] | [glob] | [regex] ] ... ]
options:
all-properties
one-line
DELETE
delete management-route [name]
DESCRIPTION
Specifies route settings for the management interface. You must configure a route on the management interface
if you want to access the management network on the BIG-IP(r) system by connecting from another network.
The management interface is available on all switch platforms and is designed for management purposes. You can
access the browser-based Configuration utility and command line configuration utility through the management
port. You cannot use the management interface in traffic management VLANs.
EXAMPLES
create management-route default gateway 10.10.10.254
Sets the management interface default gateway IP address to 10.10.10.254.
create management-route myMgmtRoute network 10.10.10.0/24 gateway 10.10.10.254
Creates a management route named myMgmtRoute for the subnet 10.10.10.0/24 whose gateway IP address is
10.10.10.254.
modify management-route 10.10.10.0/24 gateway 172.24.74.62
Changes the management interface to subnet 10.10.10.0/24, and the gateway to 172.24.74.62.
OPTIONS
default
Specifies that the system forwards packets to the destination through the default IP address and netmask,
0.0.0.0 0.0.0.0.
default-inet6
Specifies that the system forwards packets to the destination through the default version 6.0 IP address
and netmask.
description
User defined description.
glob Displays the items that match the glob expression. See help glob for a description of glob expression
syntax.
[ip address/netmask]
Specifies the IP address and netmask through which the system forwards packets to the destination. You
can use either of these formats: 0.0.0.0/0 or 0.0.0.0 0.0.0.0.
gateway
Specifies that the system forwards packets to the destination through the gateway with the specified IP
address.
mtu Specifies the maximum transmission unit (MTU) for the management interface. The value of the MTU is the
largest size that the BIG-IP system allows for an IP datagram passing through the management interface.
network
The subnet and netmask to be used for the route. This is an optional field; if empty the name should be
of the form [ip address/netmask].
regex
Displays the items that match the regular expression. The regular expression must be preceded by an at
sign (@[regular expression]) to indicate that the identifier is a regular expression. See help regex for
a description of regular expression syntax.
type Specifies that traffic should be delivered to the management interface (interface) or be dropped by the
system (blackhole).
SEE ALSO
create, delete, edit, glob, list, modify, regex, show, sys management-ip, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008-2010, 2013. All rights reserved.
BIG-IP 2015-09-24 sys management-route(1)