sys pva-traffic

sys pva-traffic(1)				  BIG-IP TMSH Manual				   sys pva-traffic(1)

NAME
       pva-traffic - Displays and resets Packet Velocity(r) ASIC (PVA) traffic statistics for the system.

MODULE
       sys

SYNTAX
       Configure the pva-traffic component within the sys module using the following syntax.

   MODIFY
	reset-stats pva-traffic

   DISPLAY
	show pva-traffic
	  options:
	    (default | exa | gig | kil | meg | peta | raw | tera | yotta | zetta)
	    global

DESCRIPTION
       You can use the pva-traffic component to display traffic statistics, including bits in and out, packets in and
       out, current, maximum, and total connections, and other miscellaneous statistics.

       The BIG-IP(r) system has one PVA accelerator; however, when you run the command show pva-traffic, the system
       displays a PVA statistics entry for each Traffic Management Microkernel (TMM).

EXAMPLES
       show pva-traffic

       Displays PVA traffic statistics for the system.

       show pva-traffic raw

       Displays PVA traffic statistics for the system in raw data form.

OPTIONS
       For information about the options that you can use with the command show, see help show.

       For information about the command reset-stats, see help reset-stats.

SEE ALSO
       reset-stats, show, sys tmm-traffic, sys traffic, tmsh

COPYRIGHT
       No part of this program may be reproduced or transmitted in any form or by any means, electronic or
       mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
       other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.

       F5 Networks and BIG-IP (c) Copyright 2008-2010. All rights reserved.

BIG-IP						      2011-04-25				   sys pva-traffic(1)