sys sflow global-settings vlan
sys sflow global-settings vlan(1) BIG-IP TMSH Manual sys sflow global-settings vlan(1)
NAME
vlan - Manages the global sFlow configuration for VLANs on the BIG-IP system.
MODULE
sys sflow global-settings
SYNTAX
Configure the vlan component within the sys sflow global-settings module using the syntax shown in the
following sections.
MODIFY
modify vlan
options:
description [string]
poll-interval [integer]
sampling-rate [integer]
DISPLAY
list vlan
options:
all-properties
non-default-properties
one-line
DESCRIPTION
You can use the vlan component to modify or list the global sFlow configuration for VLANs on the BIG-IP
system.
Note: You can modify the global sFlow configuration for VLANs on the BIG-IP system, only if you are assigned
either the Resource Administrator or Administrator user role.
EXAMPLES
modify vlan poll-interval 60 sampling-rate 1500
Sets the poll-interval to 60 seconds and the sampling-rate to 1500 packets for all monitored data sources
(VLANs) on the BIG-IP system.
OPTIONS
description
User defined description.
poll-interval
Specifies the maximum interval in seconds between polling by the sFlow agent of all monitored data
sources (VLANs) on the BIG-IP system. The default value is 10.
sampling-rate
Specifies the ratio of packets observed at all data sources (VLANs) to the samples generated. For
example, a sampling rate of 2000 specifies that 1 sample will be randomly generated for every 2000
packets observed. The default value is 2048.
SEE ALSO
list, modify, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008-2013. All rights reserved.
BIG-IP 2013-10-15 sys sflow global-settings vlan(1)