sys software status

sys software status(1)				  BIG-IP TMSH Manual			       sys software status(1)

NAME
       status - Displays the status of a BIG-IP(r) system software installation.

MODULE
       sys software

SYNTAX
       Display information about the status component within the sys software module using the following syntax.

   DISPLAY
	show status
	  options:
	    field-fmt

DESCRIPTION
       You can use the status component to display the status of the software installation, including whether the
       system is active, the name of the product being installed, the software version and build number of the
       software, and the slot and volume on which the software is installed.

       After you use the install sys software image command (see install and "sys software image") to install a new
       software image, you can use this command to monitor the progress of the installation. A percentage meter
       appears in the Status column.

EXAMPLES
	 show status

       Displays the status of the software installation in a table.

	 show status field-fmt

       Displays the status of the software installation separately for each volume on the system.

	 root@(big-ip1)(cfg-sync Standalone)(Active)(/Common)(tmos)# quit
	 [root@big-ip1:Active:Standalone] images # watch tmsh show sys software status

       Launches the Unix watch command from the Unix command line. The command produces auto-updating output similar
       to this:

	 Every 2.0s: tmsh show sys software status		      Thu Oct 18 14:04:04 2012

	 -----------------------------------------------------------------
	 Sys::Software Status
	 Volume  Product  Version      Build  Active		    Status
	 -----------------------------------------------------------------
	 HD1.1	      EM    3.2.0      222.0	  no  installing 6.000 pct
	 HD1.2	      EM    3.2.0  150.0.465	 yes		  complete
	 HD1.3	      EM    3.2.0	67.0	  no		  complete

       Where the "installing 6.000 pct" status increases until it eventually changes to "complete."  It changes to a
       specific failure message if there is an issue.

OPTIONS
       field-fmt
	    Specifies to display the software status for each volume in a field format, rather than in a table.

SEE ALSO
       show, tmsh

COPYRIGHT
       No part of this program may be reproduced or transmitted in any form or by any means, electronic or
       mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
       other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.

       F5 Networks and BIG-IP (c) Copyright 2009-2013, 2016. All rights reserved.

BIG-IP						      2016-03-14			       sys software status(1)