sys state-mirroring

sys state-mirroring(1)				  BIG-IP TMSH Manual			       sys state-mirroring(1)

NAME
       state-mirroring - Configures connection mirroring for a BIG-IP(r) system that is part of a redundant pair in a
       high availability system.

MODULE
       sys

SYNTAX
       Configure the state-mirroring component within the sys module using the syntax in the following sections.

   MODIFY
	modify state-mirroring
	  options:
	    addr [IP address]
	    peer-addr [IP address]
	    secondary-addr [IP address]
	    secondary-peer-addr [IP address]
	    state [enabled | disabled]

	edit state-mirroring
	  options:
	    all-properties
	    non-default-properties

   DISPLAY
	list state-mirroring
	list state-mirroring [option]
	show running-config state-mirroring
	show running-config state-mirroring [option]
	  options:
	    all-properties
	    non-default-properties
	    one-line

DESCRIPTION
       You can use this component to configure connection mirroring on a system that is part of a redundant pair in a
       high availability system.

       Connection mirroring is the process of duplicating connections from the active system to the standby system.
       Enabling this setting ensures a higher level of connection reliability, but it may also have an impact on
       system performance.

EXAMPLES
       modify state-mirroring state enabled addr 192.168.10.10 peer-addr 192.168.10.20

       Enables and configures connection mirroring for a high availability system in which one BIG-IP system has an
       IP address of 192.168.10.10, and its peer has an IP address of 192.168.10.20.

       modify state-mirroring state enabled

       Re-enables connection mirroring for a system for which connection mirroring was disabled.

OPTIONS
       addr Specifies the primary self-IP address on this unit to which the peer unit in this redundant pair mirrors
	    its connections. The default value is ::.

       peer-addr
	    Specifies the primary self-IP address on the peer unit to which this unit mirrors its connections. The
	    default value is ::.

       secondary-addr
	    Specifies another self-IP address on this unit to which the peer unit mirrors its connections when the
	    primary address is unavailable. The default value is ::.

       secondary-peer-addr
	    Specifies another self-IP address on the peer unit to which this unit mirrors its connections when the
	    primary peer address is unavailable. The default value is ::.

       state
	    Enables or disables connection mirroring. The default value is enabled.

SEE ALSO
       edit, list, modify, show, tmsh

COPYRIGHT
       No part of this program may be reproduced or transmitted in any form or by any means, electronic or
       mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
       other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.

       F5 Networks and BIG-IP (c) Copyright 2009-2010. All rights reserved.

BIG-IP						      2010-03-31			       sys state-mirroring(1)