wom advertised-route
wom advertised-route(1) BIG-IP TMSH Manual wom advertised-route(1)
NAME
advertised-route - Configures a route advertised by the local endpoint to remote endpoints for WAN
optimization.
MODULE
wom
SYNTAX
Configure the advertised-route component within the wom module using the syntax in the following sections.
CREATE/MODIFY
create advertised-route [name]
modify advertised-route [name | all]
options:
app-service [[string] | none]
description [string]
dest [ip address/netmask]
include [disabled | enabled]
label [value]
metric [integer]
origin [configured | discovered | manually-saved | persistable]
DISPLAY
list advertised-route
show advertised-route
options:
running-config
DELETE
delete advertised-route [name]
DESCRIPTION
You can use the advertised-route component to configure a subnet that the system can reach through the local
endpoint. You can specify a netmask or use slash format.
Routes are advertised to all connected WAN Optimization Managers. The remote endpoints use the subnet
configuration information to determine peer routing and optimization actions.
EXAMPLES
list advertised-route all
Displays all endpoint advertised routes for the local WAN Optimization Manager.
delete advertised-route adv_rt2
Deletes the advertised route adv_rt2.
OPTIONS
app-service
Specifies the name of the application service to which the object belongs. The default value is none.
Note: If the strict-updates option is enabled on the application service that owns the object, you cannot
modify or delete the object. Only the application service can modify or delete the object.
description
User defined description.
dest Specifies the IP address and netmask of the advertised route.
include
Enables or disables the inclusion of this route in the optimization of traffic. This option allows you to
define a subset of IP addresses to exclude from optimization within a larger included subnet. An excluded
endpoint advertised route must be a valid address range subset of an included endpoint advertised route.
The default is enabled.
label
Specifies an optional descriptive label for this route.
metric
Specifies a routing number to select between WAN Optimization Manager pairs. The higher the number, the
more expensive the route in terms of resources. Not currently implemented.
origin
Specifies whether the route was discovered automatically or configured manually. You can change the
origin from discovered to persistable, if you want to save the route to the file bigip_local.conf when
you use the command save config. After you run the command save config, this attribute changes to
manually saved. Endpoints that have the attribute discovered are not saved to the file bigip_local.conf.
The options are:
configured
Indicates that you manually configured this route. The system automatically sets this value, and you
cannot change it.
discovered
Indicates that the system automatically discovered this route. Note that route for which the value
of the origin property is discovered are not saved to the file bigip_local.conf.
manually-saved
After you run the command save / sys config, the value of the origin property that was set to
persistable changes to manually-saved. Note that after the system changes the value to manually-
saved, you cannot change it again.
persistable
Change the origin from discovered to persistable, if you want to save the route to the file
bigip_local.conf when you use the command save / sys config.
SEE ALSO
create, delete, list, wom local-endpoint, modify, wom remote-endpoint, wom server-discovery, show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2009-2012. All rights reserved.
BIG-IP 2017-03-31 wom advertised-route(1)