CNFs Software


The Cloud-Native Network Functions (CNFs) custom resource definitions (CRDs), software images and installation Helm charts are provided in a single TAR file. An md5 file is also provided to validate the TAR file’s integrity. Once validated and extracted, the software images can be uploaded to a local container registry, and integrated into the cluster using the CNFs Helm charts. Finally, the CNFs CRDs will be installed into the cluster.

This document describes the CNFs software, and guides you through validating, extracting and installing the CNF software components.

Software images

The table below lists and describes the software images for this software release. For a full list of software images by release, refer to the Software Releases guide.

_images/spk_info.png Note: The software image name and deployed container name may differ.

Image Version Description
f5ingress v9.0.60 The helm_release-f5ingress container is a custom CNF controller that watches the K8S API for CR updates, and configures either AFM or TMM based on the update.
tmm-img v3.0.12 The f5-tmm container is a Traffic Management Microkernel (TMM) instance that proxies and load balances application traffic between the external and internal networks.
f5-l4p-engine v2.0.3 The f5-afm-pccd container is an Application Firewall Manager (AFM) instance that converts firewall rules and NAT policies into the binary large objects (BLOBs) used by TMM.
f5-nsec-ips-daemon v2.1.2 The f5-ipsd container is the intrusion detection and prevention instance, providing deep packet inspection and prevention of malignant network packets.
tmrouted-img v0.8.37 The f5-tmm-tmrouted container proxies and forwards information between the f5-tmm-routing and f5-tmm containers.
f5dr-img v0.7.8 The f5-tmm-routing container maintains the dynamic routing tables used by TMM.
f5-toda-tmstatsd v1.7.21 The f5-toda-stats container collects application traffic processing statistics from the f5-tmm container, and forwards the data to the Otel Collectors.
f5-dssm-store v3.1.0 Contains two sets of software images; The f5-dssm-db containers that store shared, persisted session state data, and the f5-dssm-sentinel containers to monitor the f5-dssm-db containers. For more info, refer to dSSM database.
spk-cwc v3.0.6 The cnf-cwc container enables software licensing, and reports telemetry statistics regarding monthly software usage. Refer to CNFs CWC.
f5-license-helper v3.0.4 The f5-lic-helper communicates with the spk-cwc to determine the current license status of the cluster.
rabbit v3.0.2 The rabbitmq-server container as a general message bus, integrating CNFs CWC with the BIG-IP Controller Pod(s) for licensing purposes.
cert-manager-controller v1.3.2 The cert-manager-controller manages the generation and rotation of the SSL/TLS certificate that are stored as Secrets, to secure communication between the various CNFs Pods.
cert-manager-cainjector v1.3.2 The cert-manager-cainjector assists the cert-manager-controller to configure the CA certificates used by the cert-manager-webhook and K8S API.
cert-manager-webhook v1.3.2 The cert-manager-webhook ensures that SSL/TLS certificate resources created or updated by the cert-manager-contoller conform to the API specifications.
f5-debug-sidecar v7.18.3-0.0.13 The debug container provides diagnostic tools for viewing TMM's configuration, traffic processing statistics and gathering TMM diagnostic data. For more info, refer to Debug Sidecar.
f5-fluentbit v0.4.1 The fluentbit container collects and forwards statistics to the f5-fluentd container. Multiple versions are included to support the different CNFs containers.
f5-fluentd v1.4.24 The f5-fluentd container collects statistics and logging data from the Controller, TMM and dSSM Pods. For more info, refer to Fluentd Logging.
opentelemetry-collector 0.62.1 The otel-collector container gathers metrics and statistics from the TMM Pods. Refer to OTEL Collector.
f5-dssm-upgrader 1.0.20 The dssm-upgrade-hook enables dSSM DBs upgrades without service interruption or data loss. Refer to Upgrading dSSM.


Ensure you have:

  • Obtained the CNF software tarball.
  • A local container registry.
  • A workstation with Podman.


Validate and extract

Use the following steps to validate the CNFs tarball, extract the software images, installation Helm charts, and CRDs.

  1. Create a new directory for the CNFs files:

    mkdir <directory>

    In this example, the new directory is named cnfinstall:

    mkdir cnfinstall
  2. Move the CNFs files into the directory:

    mv f5-cnf-tarball* cnfinstall
  3. Change into the directory and list the files:

    cd cnfinstall; ls -1

    The files appear as:

  4. Use the md5sum command to obtain the message-digest fingerprint.

    md5sum f5-cnf-tarball-1.1.0.tgz

    The message-digest fingerprint should be 0464b10d9a69c7592446180dfba99989.

    0464b10d9a69c7592446180dfba99989  f5-cnf-tarball-1.1.0.tgz
  5. Use the cat command to validate that the F5 provided fingerprint in the .md5 file matches:

    cat f5-cnf-tarball-1.1.0.tgz.md5

    In this example, the output matches the output from the md5 command.

    0464b10d9a69c7592446180dfba99989  f5-cnf-tarball-1.1.0.tgz
  6. Extract the CNFs images, Helm charts, and CRDs from the TAR file:

    tar xvf f5-cnf-tarball-1.1.0.tgz
  7. List the newly extracted files:

    ls -1

    The file list shows the CRD bundless and the CNF image TAR file named f5-cnf-images-1.1.0.tgz:

  8. Extract the CNF Helm charts and software images:

    tar xvf f5-cnf-images-1.1.0.tgz
  9. List the extracted Helm charts and software images:

    ls -1R

    The file list shows a new tar directory with the following files:


Install CRDs

Use the following steps to extract and install the new CNF CRDs.

  1. List the CNF CRD bundle:

    ls -1 | grep crd

    The file list shows three CRD bundles:

  2. Extract the CRDs from the bundle:

    tar xvf f5-cnf-crds-n6lan-5.0.14.tgz
  3. Install the CRDs:

    kubectl apply -f f5-cnf-crds-n6lan/crds

    Note the command output: Newly installed CRDs will be indicated by created, and updated CRDs will be indicated by configured: unchanged configured unchanged unchanged unchanged unchanged unchanged unchanged unchanged unchanged unchanged unchanged unchanged unchanged unchanged unchanged unchanged configured unchanged unchanged unchanged unchanged unchanged unchanged unchanged unchanged unchanged unchanged unchanged unchanged
  4. List the installed CNFs CRDs:

    kubectl get crds | grep    f5-big

    The CRD listing will contain the full list of CRDs:                         2023-01-24T00:02:02Z                        2023-01-24T00:02:02Z                        2023-01-24T00:02:02Z                        2023-01-24T00:02:02Z                 2023-01-24T00:02:02Z                   2023-01-24T00:02:02Z                    2023-01-24T00:02:02Z                    2023-01-24T00:02:02Z                  2023-01-24T00:02:02Z                  2023-01-24T00:02:02Z                2023-01-24T00:02:02Z                    2023-02-09T22:29:25Z                         2023-02-09T22:29:25Z                       2023-01-24T00:02:02Z                        2023-01-24T00:02:02Z            2023-01-24T00:02:02Z                       2023-01-24T00:02:02Z                 2023-01-24T00:02:02Z                     2023-01-24T00:02:02Z                  2023-01-24T00:02:02Z                      2023-01-24T00:02:02Z                     2023-01-24T00:02:02Z                      2023-01-24T00:02:02Z                     2023-01-24T00:02:03Z                     2023-01-24T00:02:03Z                 2023-01-24T00:02:03Z                        2023-01-24T00:02:03Z                      2023-01-24T00:02:03Z                      2023-01-24T00:02:03Z                     2023-01-24T00:02:03Z                     2023-01-24T00:02:03Z              2023-01-24T00:02:03Z

Upload the images

Use the following steps to upload the CNFs software images to a local container registry.

  1. Install the CNFs images to your workstation’s Podman image store:

    podman load -i tar/cnf-docker-images.tgz
  2. List the CNF images to be tagged and pushed to the local container registry in the next step:

    podman images --format "table {{.Repository}} {{.Tag}} {{.ID}}"
    REPOSITORY                              TAG             IMAGE ID
    local.registry/f5ingress                v9.0.60         1fd9ba04c0fa
    local.registry/f5dr-img-init            v0.7.8          926919d8cc68
    local.registry/f5dr-img                 v0.7.8          e47812030b51
    local.registry/tmm-img                  v3.0.12         a18c56ed261b
    local.registry/f5-debug-sidecar         v7.18.3-0.0.13  20e05cd8a907
    local.registry/spk-cwc                  v3.0.6          aa136df422b0
    local.registry/rabbit                   v3.0.2          d1b34116414b
    local.registry/f5-dssm-upgrader         1.0.20          84e01f44dbed
    local.registry/f5-toda-tmstatsd         v1.7.21         e2d308a3eada
    local.registry/f5-fluentbit             v0.4.1          04eb05a57e12
    local.registry/f5-license-helper        v3.0.4          90971a6d9e93
    local.registry/f5-dssm-store            v3.1.0          4f621d673ff0
    local.registry/f5-l4p-engine            v2.0.3          e6cc6290416d
    local.registry/f5-nsec-ips-daemon       v2.1.2          3acee3a47373
    local.registry/f5-fluentd               v1.4.24         10f1ecf225fe
    local.registry/tmrouted-img             v0.8.37         3ff758d640f3
    local.registry/cert-manager-ctl         1.3.2           f12fe2000d77
    local.registry/cert-manager-webhook     1.3.2           c7abc19e5278
    local.registry/cert-manager-cainjector  1.3.2           6f627f2fddd2
    local.registry/cert-manager-controller  1.3.2           b43f59f240d3
    local.registry/opentelemetry-collector  0.62.1          ce87f9acddfa
  3. Tag and push each image to the local container registry. For example:

    podman tag <local.registry/image name>:<version> <registry>/<image name>:<version>
    podman push <registry_name>/<image name>:<version>

    In this example, the f5ingress:v9.0.60 image is tagged and pushed to the remote registry

    podman tag local.registry/f5ingress:v9.0.60
    podman push
  4. Once all of the images have uploaded, verify the images exist in the local container registry:

    curl -X GET https://<registry>/v2/_catalog -u <user:pass>

    For example:

    curl -X GET -u cnfadmin:cnfadmin

Next step

Continue to the CNFs Cert Manager guide to secure CNFs communications.


Provide feedback to improve this document by emailing