bigip_snmp_community – Manages SNMP communities on a BIG-IP.¶

New in version 1.0.0.

Synopsis
Parameters
Notes
Examples
Return Values
Status

Synopsis ¶

Assists in managing Simple Network Management Protocol (SNMP) communities on a BIG-IP system. Different SNMP versions are supported by this module. Note the different parameters offered by this module, as different parameters work for different versions of SNMP. This is important if you are mixing versions v2c and 3.

Parameters ¶

Parameter		Choices/Defaults	Comments
access string		Choices: ro rw read-only read-write	Specifies the user's access level to the MIB. When creating a new community, if this parameter is not specified, the default is `ro`. When `ro`, specifies the user can view the MIB, but cannot modify the MIB. When `rw`, specifies the user can view and modify the MIB.
community string			Specifies the community string (password) for access to the MIB. This parameter is only relevant when `version` is `v1` or `v2c`. If `version` is something else, this parameter is ignored.
ip_version string		Choices: 4 6	Specifies whether the record applies to IPv4 or IPv6 addresses. When creating a new community, if this value is not specified, the default is `4`. This parameter is only relevant when `version` is `v1` or `v2c`. If `version` is something else, this parameter is ignored.
name string			Name that identifies the SNMP community. When `version` is `v1` or `v2c`, this parameter is required. The name `public` is a reserved name on the BIG-IP. This module handles that name differently than others. Functionally, you should not see a difference.
oid string			Specifies the object identifier (OID) for the record. When `version` is `v3`, this parameter is required. When `version` is either `v1` or `v2c`, if this value is specified, then `source` must not be set to `all`.
partition string		Default: "Common"	Device partition to manage resources on.
port integer			Specifies the port for the trap destination. This parameter is only relevant when `version` is `v1` or `v2c`. If `version` is something else, this parameter is ignored.
provider dictionary added in 1.0.0			A dict object containing connection details.
	auth_provider string		Configures the auth provider for to obtain authentication tokens from the remote device. This option is really used when working with BIG-IQ devices.
	no_f5_teem boolean	Choices: no ← yes	If `yes`, TEEM telemetry data is not sent to F5. You may omit this option by setting the environment variable `F5_TELEMETRY_OFF`. Previously used variable `F5_TEEM` is deprecated as its name was confusing.
	password string / required		The password for the user account used to connect to the BIG-IP or the BIG-IQ. You may omit this option by setting the environment variable `F5_PASSWORD`. aliases: pass, pwd
	server string / required		The BIG-IP host or the BIG-IQ host. You may omit this option by setting the environment variable `F5_SERVER`.
	server_port integer	Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`.
	timeout integer		Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	transport string	Choices: rest ←	Configures the transport connection to use when connecting to the remote device.
	user string / required		The username to connect to the BIG-IP or the BIG-IQ. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
	validate_certs boolean	Choices: no yes ←	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`.
snmp_auth_password string			Specifies the password for the user. When creating a new SNMP `v3` community, this parameter is required. This value must be at least 8 characters long.
snmp_auth_protocol string		Choices: md5 sha none	Specifies the authentication method for the user. When `md5`, specifies the system uses the MD5 algorithm to authenticate the user. When `sha`, specifies the secure hash algorithm (SHA) to authenticate the user. When `none`, specifies the user does not require authentication. When creating a new SNMP `v3` community, if this parameter is not specified, the default is `sha`.
snmp_privacy_password string			Specifies the password for the user. When creating a new SNMP `v3` community, this parameter is required. This value must be at least 8 characters long.
snmp_privacy_protocol string		Choices: aes des none	Specifies the encryption protocol. When `aes`, specifies the system encrypts the user information using AES (Advanced Encryption Standard). When `des`, specifies the system encrypts the user information using DES (Data Encryption Standard). When `none`, specifies the system does not encrypt the user information. When creating a new SNMP `v3` community, if this parameter is not specified, the default is `aes`.
snmp_username string			Specifies the name of the user for whom you want to grant access to the SNMP v3 MIB. This parameter is only relevant when `version` is `v3`. If `version` is something else, this parameter is ignored. When creating a new SNMP `v3` community, this parameter is required. This parameter cannot be changed once it has been set.
source string			Specifies the source address for access to the MIB. This parameter can accept a value of `all`. If this parameter is not specified, the value is `all`. This parameter is only relevant when `version` is `v1` or `v2c`. If `version` is something else, this parameter is ignored. If `source` is set to `all`, it is not possible to specify an `oid`. This will raise an error. You should provide this parameter when `state` is `absent`, so the correct community is removed. To remove the `public` SNMP community that comes with a BIG-IP, this parameter should be `default`.
state string		Choices: present ← absent	When `present`, ensures the address list and entries exists. When `absent`, ensures the address list is removed.
update_password string		Choices: always ← on_create	`always` allows users to update passwords. `on_create` only sets the password for newly created resources.
version string		Choices: v1 v2c ← v3	Specifies to which SNMP version the trap destination applies.

Notes ¶

Note

For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
Requires BIG-IP software version >= 12.
The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples ¶

- name: Create an SMNP v2c read-only community
  bigip_snmp_community:
    name: foo
    version: v2c
    source: all
    oid: .1
    access: ro
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Create an SMNP v3 read-write community
  bigip_snmp_community:
    name: foo
    version: v3
    snmp_username: foo
    snmp_auth_protocol: sha
    snmp_auth_password: secret
    snmp_privacy_protocol: aes
    snmp_privacy_password: secret
    oid: .1
    access: rw
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Remove the default 'public' SNMP community
  bigip_snmp_community:
    name: public
    source: default
    state: absent
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

Return Values ¶

The following are the fields unique to this module:

Key	Returned	Description
access string	changed	The new access level for the MIB. Sample: ro
community string	changed	The new community value. Sample: community1
ip_version string	changed	The new IP version value. Sample: 0.1
oid string	changed	The new OID value. Sample: 0.1
snmp_auth_password string	changed	The new password of the given snmp_username. Sample: secret1
snmp_auth_protocol string	changed	The new SNMP auth protocol. Sample: sha
snmp_privacy_password string	changed	The new password of the given snmp_username. Sample: secret2
snmp_privacy_protocol string	changed	The new SNMP privacy protocol. Sample: aes
snmp_username string	changed	The new SNMP username. Sample: user1
source string	changed	The new source address to access the MIB. Sample: 1.1.1.1

Status ¶

Authors¶

Tim Rupp (@caphrim007)
Wojciech Wypior (@wojtek0806)

bigip_snmp_community – Manages SNMP communities on a BIG-IP.¶

Synopsis¶

Parameters¶

Notes¶

Examples¶

Return Values¶

Status¶

Authors¶

Synopsis ¶

Parameters ¶

Notes ¶

Examples ¶

Return Values ¶

Status ¶