Last updated on: 2024-04-01 03:24:20.

bigip_timer_policy – Manage timer policies on a BIG-IP

New in version 1.0.0.

Synopsis

  • Manage timer policies on a BIG-IP system.

Parameters

Parameter Choices/Defaults Configuration Comments
description
string
Specifies descriptive text that identifies the timer policy.
name
string / required
Specifies the name of the timer policy.
partition
string
Default:
"Common"
Device partition to manage resources on.
provider
dictionary
added in 1.0.0
A dict object containing connection details.
auth_provider
string
Configures the auth provider for to obtain authentication tokens from the remote device.
This option is really used when working with BIG-IQ devices.
no_f5_teem
boolean
    Choices:
  • no ←
  • yes
If yes, TEEM telemetry data is not sent to F5.
You may omit this option by setting the environment variable F5_TELEMETRY_OFF.
Previously used variable F5_TEEM is deprecated as its name was confusing.
password
string / required
The password for the user account used to connect to the BIG-IP or the BIG-IQ.
You may omit this option by setting the environment variable F5_PASSWORD.

aliases: pass, pwd
server
string / required
The BIG-IP host or the BIG-IQ host.
You may omit this option by setting the environment variable F5_SERVER.
server_port
integer
Default:
443
The BIG-IP server port.
You may omit this option by setting the environment variable F5_SERVER_PORT.
timeout
integer
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
transport
string
    Choices:
  • rest ←
Configures the transport connection to use when connecting to the remote device.
user
string / required
The username to connect to the BIG-IP or the BIG-IQ. This user must have administrative privileges on the device.
You may omit this option by setting the environment variable F5_USER.
validate_certs
boolean
    Choices:
  • no
  • yes ←
If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.
You may omit this option by setting the environment variable F5_VALIDATE_CERTS.
rules
list / elements=dictionary
Rules you want assigned to the timer policy.
destination_ports
list / elements=string
The list of destination ports on which to match the rule.
Specify a port range by specifying start and end ports separated by a dash (-).
This field is only available if you have selected the sctp, tcp, or udp protocol.
idle_timeout
string
Default:
"unspecified"
Specifies an idle timeout, in seconds, for protocol and port pairs that match the timer policy rule.
When infinite, specifies the protocol and port pairs that match the timer policy rule have no idle timeout.
When specifying rules, if this parameter is not specified, the default is unspecified.
name
string / required
The name of the rule.
protocol
string
    Choices:
  • all-other ←
  • ah
  • bna
  • esp
  • etherip
  • gre
  • icmp
  • ipencap
  • ipv6
  • ipv6-auth
  • ipv6-crypt
  • ipv6-icmp
  • isp-ip
  • mux
  • ospf
  • sctp
  • tcp
  • udp
  • udplite
Specifies the IP protocol entry for which the timer policy rule is being configured. This could be a layer-4 protocol (such as tcp, udp or sctp.
Only flows matching the configured protocol will make use of this rule.
When all-other is specified, if there are no specific ip-protocol rules that match the flow, the flow matches all the other ip-protocol rules.
When specifying rules, if this parameter is not specified, the default is all-other.
state
string
    Choices:
  • present ←
  • absent
When present, ensures the resource exists.
When absent, ensures the resource is removed.

Notes

Note

  • For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
  • Requires BIG-IP software version >= 12.
  • The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Create a timer policy
  bigip_timer_policy:
    name: timer1
    description: My timer policy
    rules:
      - name: rule1
        protocol: tcp
        idle_timeout: indefinite
        destination_ports:
          - 443
          - 80
      - name: rule2
        protocol: 200
      - name: rule3
        protocol: sctp
        idle_timeout: 200
        destination_ports:
          - 21
    state: present
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Remove a timer policy and all its associated rules
  bigip_timer_policy:
    name: timer1
    description: My timer policy
    state: absent
    provider:
      user: admin
      password: secret
      server: lb.mydomain.com
  delegate_to: localhost

Return Values

The following are the fields unique to this module:

Key Returned Description
description
string
changed
The new description of the timer policy.

Sample:
True


Status

Authors

  • Tim Rupp (@caphrim007)