F5SPKIngressTCP Reference¶

The F5SPKIngressTCP Custom Resource (CR) configuration parameters. Each heading below represents the top-level parameter element. For example, to set the Kubernetes Service name, use service.name.

service¶

Parameter	Description
`name`	Name of the Kubernetes Service providing access to the Pods.
`port`	The exposed port for the service.

spec¶

Parameter	Description
`destinationAddress`	The advertised IPv4 address of the application.
`ipv6destinationAddress`	The advertised IPv6 address of the application.
`destinationPort`	The external service port of the application.
`snat`	Translate the source IP address of ingress packets to TMM's self IP addresses. Use SRC_TRANS_AUTOMAP to enable, and SRC_TRANS_NONE to disable (default).
`idleTimeout`	The number of seconds a connection can remain idle before deletion. The default is 300. You can also set immediate or indefinite.
`category`	The F5SPKVlan `category` to associate with the virtual server.
`clientTimeout`	The seconds allowed for clients to transmit enough data to select a server pool. The default timeout is 30 seconds.
`ipFragReass`	Reassemble IP fragments (true / false). The default is true.
`ipTosToClient`	The ToS level assigned to IP packets sent to clients. The default is 65535, not modified.
`ipTosToServer`	The ToS level assigned to IP packets sent to servers. The default is 65535, not modified.
`ipV4TTL`	The outgoing packet IP TTL value for IPv4 traffic. The default is 255.
`ipV6TTL`	The outgoing packet TTL value for IPv6 traffic. The default is 64.
`linkQosToClient`	The QoS level assigned to packets sent to clients. The default is 65535, not modified.
`linkQosToServer`	The QoS level assigned to packets sent to servers. The default is 65535, not modified.
`loadBalancingMethod`	The traffic load balancing algorithm used.
`looseClose`	Close loosely-initiated connections when receiving the first FIN packet (true/false). The default is false.
`looseInitiation`	Initialize a connection when receiving a TCP packet, rather than requiring a SYN packet (true/false). The default is false.
`mssOverride`	The maximum segment size for server connections, and the MSS advertised to clients. The default value is 0 (disabled).
`rcvwnd`	The window size to use, the minimum and default is 65535 bytes.
`resetOnTimeout`	Resets connections on timeout (true/false). The default is true.
`rttFromClient`	Enable the TCP timestamp to measure client round trip times (true/false). The default is false.
`rttFromServer`	Enable the TCP timestamp to measure server round trip times (true/false). The default is false.
`serverSack`	Support server sack in cookie responses (true/false). The default is false.
`serverTimestamp`	Supports the server timestamp in cookie responses (true/false). The default is false.
`priorityToClient`	The internal packet priority assigned to packets sent to clients. The default is 65535, not modified.
`priorityToServer`	The internal packet priority assigned to packets sent to servers. The default is 65535, not modified.
`syncCookieEnable`	Enables syn-cookies on the virtual server (true/false). The default is true.
`syncookieMss`	The MSS for server connections with SYN Cookies enabled, and the MSS advertised to clients. The default is 0 (disabled).
`syncookieWhitelist`	Use SYN Cookie WhiteList with software SYN Cookies (true/false). The default is false.
`tcpCloseTimeout`	The TCP close timeout in seconds. You can specify immediate or indefinite. The default is 5.
`tcpGenerateIsn`	Generate TCP sequence numbers on all SYNs conforming with RFC1948, and allow timestamp recycling (true/false). The default is false.
`tcpHandshakeTimeout`	The TCP handshake timeout in seconds. You specify immediate or indefinite. The default is 5.
`tcpKeepAliveInterval`	The keep-alive probe interval in seconds. The default value is 0 (disabled).
`tcpServerTimeWaitTimeout`	Specifies a TCP time_wait timeout in milliseconds. The default value is 0.
`tcpStripSack`	Blocks the TCP SackOK option from passing to servers on SYN (true or false). The default is false.
`vlans.vlanList`	A list specifying one more more VLANs to listen for application traffic.
`vlans.category`	Specifies an F5SPKVlan `category` parameter value to either allow or deny ingress traffic.
`vlans.disableListedVlans`	Disables the VLANs specified with the `vlanList` parameter: `true` or `false` (default). Excluding one VLAN may simplify having to enable many VLANS.

monitors¶

Parameter	Description
`icmp.interval`	Specifies in seconds the monitor check frequency. The default value is 5.
`icmp.timeout`	Specifies in seconds the time in which the target must respond. The default value is 16.
`icmp.username`	The username for HTTP authentication.
`icmp.password`	The password for HTTP authentication.
`icmp.serversslProfileName`	Specifies the server side SSL profile the monitor will use to ping the target.
`tcp.interval`	Specifies in seconds the monitor check frequency. The default value is 5.
`tcp.timeout`	Specifies in seconds the time in which the target must respond. The default value is 16.
`tcp.username`	The username for HTTP authentication.
`tcp.password`	The password for HTTP authentication.
`tcp.serversslProfileName`	Specify the server side SSL profile the monitor will use to ping the target.

Previous Next