APIRef_tm_gtm_monitor_tcp-half-openΒΆ

mgmt/tm/gtm/monitor/tcp-half-open

/tm/gtm/monitor

TCP Half Open monitor configuration.

REST Endpoints

Collection URI
/mgmt/tm/gtm/monitor/tcp-half-open
Collection Methods
OPTIONS, GET
Resource URI
/mgmt/tm/gtm/monitor/tcp-half-open/~resource id
Resource Methods
OPTIONS, GET, PUT, PATCH, DELETE, POST
Resource Natural Key
name, partition, subPath

Properties

Name Type Default Value Required Access Description
appService string   optional read/write The application service to which the object belongs.
defaultsFrom string   optional read/write Specifies the existing monitor from which the system imports settings for the new monitor.
description string   optional read/write User defined description.
destination string   optional read/write Specifies the IP address and service port of the resource that is the destination of this monitor. Possible values are: *:* (Specifies to perform a health check on the IP address and port supplied by a pool member), *:port (Specifies to perform a health check on the server with the IP address supplied by the pool member and the port you specify.), <IP>:<port> (Specifies to mark a pool member up or down based on the response of the server at the IP address and port you specify.), and <IP>:<port> (with the transparent option enabled) (Specifies to perform a health check on the server at the IP address and port that you specify, route the check through the IP address and port supplied by the pool member, and mark the pool member (the gateway) up or down accordingly.).
ignoreDownResponse string   optional read/write Specifies whether the monitor ignores a down response from the system it is monitoring. The default value is disabled.
interval integer   optional read/write Specifies the frequency at which the system issues the monitor check. The default value is 30 seconds.
tmPartition string   optional read/write Displays the administrative partition within which the monitor resides.
probeAttempts integer   optional read/write Specifies the number of times the BIG-IP system attempts to probe the host server, after which the BIG-IP system considers the host server down or unavailable. The default value is 3 attempts.
probeInterval integer   optional read/write Specifies the frequency at which the BIG-IP system probes the host server. The default value is 1 second.
probeTimeout integer   optional read/write Specifies the number of seconds after which the BIG-IP system times out the probe request to the BIG-IP system. The default value is 5 seconds.
timeout integer   optional read/write Specifies the number of seconds the target has in which to respond to the monitor request. The default value is 120 seconds. If the target responds within the set time period, it is considered up. If the target does not respond within the set time period, it is considered down. Also, if the target responds with a RESET packet, the system immediately flags the target as down without waiting for the timeout interval to expire.
transparent string   optional read/write Specifies whether the monitor operates in transparent mode. Monitors in transparent mode can monitor pool members through firewalls. The default value is disabled.
Copyright (c) 2016, F5 Networks Inc. All Rights Reserved.

The BIG-IP API Reference documentation contains community-contributed content. F5 does not monitor or control community code contributions. We make no guarantees or warranties regarding the available code, and it may contain errors, defects, bugs, inaccuracies, or security vulnerabilities. Your access to and use of any code available in the BIG-IP API reference guides is solely at your own risk.