APIRef_tm_ltm_auth_radius¶
mgmt/tm/ltm/auth/radius
RADIUS configuration for remote RADIUS client authentication
REST Endpoints
- Collection URI
/mgmt/tm/ltm/auth/radius- Collection Methods
OPTIONS, GET- Resource URI
/mgmt/tm/ltm/auth/radius/~resource id- Resource Methods
OPTIONS, GET, PUT, PATCH, DELETE, POST- Resource Natural Key
name, partition, subPath
Properties
| Name | Type | Default Value | Required | Access | Description |
|---|---|---|---|---|---|
accountingBug |
string | disabled | optional | read/write | Enables or disables validation of the accounting response vector. This option should be necessary only on older servers. The default value is disabled. |
appService |
string | optional | read/write | The application service that the object belongs to. | |
clientId |
string | optional | read/write | Sends a NAS-Identifier RADIUS attribute with string bar. If you do not specify a value for the client-id option, the system uses the pluggable authentication module (PAM) service type. You can disable this feature by specifying a blank client ID. | |
debug |
string | disabled | optional | read/write | Enables or disables syslog-ng debugging information at LOG DEBUG level. Not recommended for normal use. The default value is disabled. |
description |
string | optional | read/write | User defined description. | |
tmPartition |
string | Common | optional | read/write | Displays the partition within which the component resides. |
retries |
integer | 3 | optional | read/write | Specifies the number of authentication retries that the BIG-IP local traffic management system allows before authentication fails. The default value is 3. |
serviceType |
string | authenticate-only | optional | read/write | Specifies the type of service requested from the RADIUS server. The default value is authenticate-only |
Lists
| Name | Type | Default Value | Required | Access | Description |
|---|---|---|---|---|---|
servers (auth/radius-server) |
array_structure | optional | read/write | Specifies the IP addresses of the RADIUS servers that the BIG-IP local traffic management system uses to obtain authentication data. You can add, delete, or replace all existing IP addresses. Note that for each server you add, you must create a corresponding radius-server component that specifies the server name, port number, RADIUS secret, and timeout value. |
Copyright (c) 2016, F5 Networks Inc. All Rights Reserved.
The BIG-IP API Reference documentation contains community-contributed content. F5 does not monitor or control community code contributions. We make no guarantees or warranties regarding the available code, and it may contain errors, defects, bugs, inaccuracies, or security vulnerabilities. Your access to and use of any code available in the BIG-IP API reference guides is solely at your own risk.