RoutingConfig¶

The RoutingConfig resource defines tenant-specific routing intent, including BGP neighbors and VXLAN or VRF attachment.

Mutual exclusivity rules:

`spec`¶

Field	Type	Required	Description
`templateRef`	object	Yes	Reference to the `RoutingTemplate` used to render the tenant configuration.
`vxlanRef`	string	Conditional	Soft reference to a VXLAN CR by name. Use for VXLAN/EVPN overlay scenarios. The VRF configuration is read from the referenced VXLAN CR. Mutually exclusive with `vrf`.
`vrf`	string	Conditional	VRF name for direct VRF assignment without VXLAN. Use for north–south BGP with tenant VRF scenarios where VXLAN/EVPN overlays are not required. Mutually exclusive with `vxlanRef`.
`neighbors`	array	Optional	List of tenant-specific BGP neighbor definitions. Defaults to `[]`.
`neighborSecrets`	array	Optional	List of BGP neighbor authentication secrets. Defaults to `[]`.
`irbInterfaces`	array	Optional	List of Integrated Routing and Bridging (IRB) interfaces for this tenant.

Field	Type	Required	Description
`name`	string	Yes	The `metadata.name` of the `RoutingTemplate` CR. Minimum length is 1.

Each neighbor must specify either ip or interface, but not both.

Field	Type	Required	Constraints	Description
`ip`	string	Conditional	Must be a valid IPv4 or IPv6 address.	The IP address of the BGP neighbor.
`interface`	string	Conditional	Minimum length is 1.	The interface name of the BGP neighbor.
`remoteAs`	integer (int64)	Yes	Minimum length is 1 and maximum length is 4294967295	The remote ASN of the BGP neighbor.
`families`	array of strings	Optional	—	The address families to enable for this neighbor.

Note

ip and interface are not mutually exclusive. You can define either one or both for a single neighbor.

Field	Type	Required	Description
`address`	string	Yes	The address of the BGP neighbor to authenticate.
`secretRef`	object	Yes	Reference to the Kubernetes Secret containing the authentication password.

Field	Type	Required	Constraints	Description
`id`	string	Yes	Minimum length is 1	Unique identifier for the IRB interface.
`ipv4Address`	string	Conditional	Must be a valid IPv4 address. Required if `ipv4Prefix` is set; must be omitted if `ipv4Prefix` is omitted.	IPv4 address for the IRB interface.
`ipv4Prefix`	integer (int64)	Conditional	Minimum value is 1, Maximum value is 32. Required if `ipv4Address` is set; must be omitted if `ipv4Address` is omitted.	Prefix length for the IPv4 IRB address.
`ipv6Addresses`	array	Optional	—	List of IPv6 addresses for the IRB interface. IPv6 supports multiple addresses per interface (RFC 4291).

Note

ipv4Address and ipv4Prefix must both be specified or both be omitted.

Field	Type	Required	Constraints	Description
`address`	string	Yes	Must be a valid IPv6 address.	IPv6 address for the IRB interface.
`prefix`	integer	Yes	—	Prefix length for the IPv6 address.