| Info |
Application |
Started running APIresources command |
| Error |
Application |
Failed at running APIresources command |
| Error |
Application |
Error %s getting incluster config |
| Error |
Application |
Error %s, creating clientset |
| Error |
Application |
Error %s, getting clientset |
| Error |
Application |
Error %s, getting context |
| Info |
Application |
Started running ClusterInfoDump command |
| Error |
Application |
Failed at running ClusterInfoDump command |
| Info |
Application |
Cluster info dumped |
| Error |
Application |
Error %s, listing %s ConfigMap in %s namespace |
| Error |
Application |
Error %s, updating %s ConfigMap in %s namespace |
| Error |
Application |
DEBUG: Error getting tmm pod list; %v |
| Info |
Application |
Started describing %v |
| Error |
Application |
%v |
| Info |
Application |
Completed describing %v with %v |
| Error |
Application |
Failed to get list of namespaces with error: %s |
| Info |
Application |
Creating the secret %s |
| Info |
Application |
Updating the secret %s |
| Error |
Application |
Error creating/updating secret[%v] with name: [%v] err: [%v] |
| Error |
Application |
Error reading secret name: [%v] err: [%v] |
| Error |
System |
Failed to create AMQP. Error %s |
| Info |
System |
Successfully connected to rabbitmq, %+v |
| Error |
Application |
Failed to Setup CPCL. %s |
| Critical |
Application |
Error %s, Registering device failed |
| Error |
System |
Error %s, failed to update configmap. key: %s, value: %s |
| Error |
Application |
Error %s, Switching license failed. Status %s |
| Critical |
Application |
Failed to activate JWT: %v |
| Warning |
Application |
Received ignorable error in activating JWT : %s |
| Error |
Application |
Failed to send telemetry report %v |
| Warning |
Application |
Received ignorable error in handling configreport : %s |
| Error |
Application |
Failed to activate %v |
| Warning |
Application |
Received ignorable error in ack verification : %s |
| Error |
Application |
Failed to verify telemetry report %v |
| Notice |
Application |
Pod deleted in middle of telemetry generation. Generating Report again |
| Notice |
Application |
Pod deleted in middle of updating current report. Updating current report |
| Notice |
Application |
Pod deleted in middle of updating telemetry status. Updating telemetry status |
| Notice |
Application |
Pod deleted in middle of setting telemetry ready state. Setting ready state |
| Notice |
Application |
Pod deleted in middle of re-initializing next report. Re-initializing now |
| Notice |
Application |
Telemetry is not yet initialized |
| Notice |
Application |
Telemetry initialization done |
| Notice |
Application |
Pod was deleted on random day within month before report generation |
| Notice |
Application |
Pod was deleted on month end before report generation |
| Notice |
Application |
Pod was deleted on month end after report generation |
| Notice |
Application |
On startup, state is %s and context is %s and current periodic telemetry state is :%s |
| Notice |
Application |
Received device registration complete state |
| Notice |
Application |
Config Report is ready to download |
| Notice |
Application |
Verification Successful |
| Error |
Application |
Failed to Inform SPK Controllers on License Status. %s |
| Info |
Application |
Nothing to do for now!! |
| Warning |
Application |
Received license expiry notification |
| Warning |
Application |
Received public key expiry notification |
| Error |
Application |
error %s, failed to collect telemetry report |
| Error |
Application |
error %s, failed to update observation start time |
| Error |
Application |
error %s, failed to update observation end time |
| Error |
Application |
ERROR: %v retrieving config map from k8s |
| Error |
Application |
error %s, failed to send telemetry report |
| Alert |
Application |
Failed to create new license server: %v |
| Alert |
Application |
Failed to read configuration. %s |
| Alert |
System |
Failed to read config map %s. Error %s |
| Alert |
Application |
Error %s, failed to send config report. Status %s |
| Alert |
Application |
Error %s, failed to send telemetry report. Status %s |
| Alert |
Application |
Error %s, failed to download config report, report: %s |
| Alert |
Application |
Error %s, failed to download telemetry report, report: %s |
| Alert |
Application |
Error %s, failed to verify signed config report. Status %s |
| Alert |
Application |
Error %s, failed to verify signed telemetry report. Status %s |
| Alert |
Application |
Error %s, Re-Registering device failed |
| Error |
System |
Error %s, in reading ConfigMap for key %s |
| Info |
Application |
key: %v -> Value: %v |
| Info |
Application |
TEEM Cert URL %s |
| Info |
Application |
TEEM Entitlement URL %s |
| Info |
Application |
TEEM Initial Config URL %s |
| Info |
Application |
Mode configured is %s |
| Info |
Application |
Changing context TO \ |
| Info |
Application |
Changing error TO \ |
| Info |
Application |
Changing error message TO \ |
| Info |
Application |
Received ignorable error in initial activation callback : %s |
| Info |
Application |
Activation successful status: %s, payload: %s |
| Info |
Application |
Received ignorable error in initial config report callback : %s |
| Info |
Application |
Config Report prepared by CPCL, ready to download status: %s, payload %s |
| Alert |
Application |
Failed to verify signature %v |
| Info |
Application |
Received ignorable error in verify signature callback: %s |
| Info |
Application |
Signature verification successful status: %s, payload: %s |
| Alert |
System |
Error %s, failed to read configmap. key: %s |
| Alert |
System |
Error %s, failed to update configmap. key: %s, value %s |
| Alert |
Application |
Failed to start telemetry. Error: %s |
| Info |
Application |
Received license expiring notification %s |
| Info |
Application |
Received certificate expiring notification %s |
| Info |
Application |
Rotating Cert Chain. Cert %s |
| Alert |
System |
Failed to update config map. Error %s |
| Notice |
Application |
License will expire in %d days. |
| Notice |
Application |
License is expiring today. |
| Alert |
Application |
License expired on %s. |
| Notice |
Application |
Report is ready to download. |
| Notice |
Application |
Please upload an acknowledgement for the telemetry report. |
| Notice |
Application |
Changing state TO \ |
| Error |
Application |
ERROR: %v marshing context to string |
| Info |
Compliance |
Storing context %s |
| Info |
Application |
Context read is %s |
| Error |
Application |
ERROR: %v getting telemetry string |
| Info |
Application |
Storing license status to secret %s |
| Error |
Application |
Failed to store license status to secret %s. Error %s |
| Error |
System |
Failed to read license status secret store. Context %s, error %s |
| Error |
Application |
Failed to unmarshal license status secret store. Context %s, error %s |
| Error |
Application |
ERROR: %v Marshling telemetry status |
| Info |
Application |
Storing telemetry status to secret %s |
| Error |
System |
Failed to store telemetry status to secret %s. Error %s |
| Error |
System |
Failed to read telemetry status secret store. error %s |
| Error |
Application |
Failed to unmarshal telemetry status secret store. error %s |
| Error |
Application |
Failed to store license status. Context: %s, Error: %s |
| Info |
Application |
License Status read during setup. Context %s, state %s, errCode %s, errString %s, action %s |
| Error |
Application |
Failed to store telemetry status. Error: %s |
| Info |
Application |
Telemetry Status read during setup. state %s, errCode %s, errString %s, action %s |
| Error |
Application |
Failed to store telemtry status. Error: %s |
| Error |
System |
Failed to update config map %s. Error %s |
| Error |
Application |
Failed to read context. Error: %s |
| Error |
Application |
Failed to store context. Error: %s |
| Info |
Application |
Status copied to ContextNone: %v from %s: %v |
| Info |
Application |
Timer fired, calling updateTelemetry |
| Info |
Application |
Current context is %s, so skipping the telemetry |
| Error |
Application |
Error creating new jobId |
| Error |
Application |
Failed to Create Request Payload for Debug API request message: %s %s. %v |
| Error |
Application |
Error publishing Debug API request message: %s %s. %s |
| Info |
Application |
Published Debug API request message: %s %s ======== |
| Info |
Application |
DEBUG: Timeout/Purge ticker is already running |
| Error |
Application |
DEBUG: Failed to get list of tmm pod IDs |
| Error |
Application |
DEBUG: Failed to get tmm pod id list, setting ExpectedRespCnt as ErrTmmPodCnt |
| Info |
Application |
DEBUG: Starting the ticker for job timeout/purge |
| Info |
Application |
DEBUG: Stopping the ticker of job timeout/purge |
| Info |
Application |
No debug jobs currently to check for purge |
| Info |
Application |
DEBUG: Setting OperationStop for job timeout/purge ticker to stop with no debug util jobs in the queue |
| Error |
Application |
DEBUG: error while parsing payload to JobDataDebugUtil : %s |
| Error |
Application |
DEBUG: Request with job ID : %s timed out. %d/%d responses received |
| Info |
Application |
DEBUG: Request with job ID : %s expired |
| Info |
Application |
Adding new job %s |
| Info |
Application |
DEBUG: Setting OperationStart for job timeout/purge ticker to start with current number of debug jobs in the queue 1 |
| Info |
Application |
DEBUG: error while parsing debug util job data |
| Error |
Application |
Response received from tmmId = %s after the request timeout |
| Info |
Application |
DEBUG: Updating job %s |
| Info |
Application |
DEBUG: Adding new tmm response, tmmId = %s, currentRespCnt = %d |
| Info |
Application |
DEBUG: Job Completes! |
| Info |
Application |
ParseJobDataDebugUtil unmarshall error : %s |
| Info |
Application |
DEBUG: Succeeded in getting tmm pod id list, setting ExpectedRespCnt as %d |
| Info |
Application |
Deleting the job data with ID : %s from the job queue |
| Info |
Application |
Deleted the job data with ID : %s from the job queue |
| Info |
Application |
Deleting the qkview job with job ID : %s from the job queue |
| Info |
Application |
Deleting the qkview jobs started |
| Info |
Application |
Deleted the qkview jobs |
| Info |
Application |
fluentbitEnabled: %s |
| Info |
Application |
mirrorLogOutputStdout |
| Error |
Application |
Unable to make fifo file: %s error: %v |
| Error |
Application |
Unable to open file: %s error: %v |
| Error |
Application |
Unable to get pipe reader/writer file: %s error: %v |
| Info |
Application |
mirrorLogOutputStderr |
| Error |
Application |
Unable to write file: %s error: %v |
| Error |
Application |
Error listening on connection: %v |
| Info |
Application |
Listening on |
| Error |
Application |
Error accepting connection: %v |
| Error |
Application |
Error removing file %v: %v |
| Info |
Application |
File %s removed successfully |
| Info |
Application |
Started creating %v |
| Info |
Application |
Creating %v |
| Info |
Application |
crawling %s |
| Info |
Application |
%s doesn't exist |
| Info |
Application |
error while extracting %s |
| Info |
Application |
extractTar: wait for complete |
| Info |
Application |
extracting: |
| Info |
Application |
Error in saving file in %s |
| Info |
Application |
Saving file into %s |
| Error |
Application |
CopyDir: failed: %v |
| Info |
Application |
Error in creating consolidated tar %v |
| Info |
Application |
CopyFile: failed: %v \n |
| Info |
Application |
Error %v in deleting %v |
| Info |
Application |
ParseJobDataQkview unmarshall error : %s |
| Info |
Application |
ParseJobDataQkview: JobDataQkview that is being unmarshalled input.FileLocation : %s |
| Error |
Application |
DEBUG: Shared location %v not accessible with error %v |
| Info |
Application |
Error while getting info about containers |
| Info |
Application |
Container details to collect qkview %s |
| Info |
Application |
built request.Body successfully:\n%v\n |
| Info |
Application |
Configured timeout value: %v\n |
| Info |
Application |
read resp.Body successfully:\n%v\n |
| Info |
Application |
Creating manifest .. |
| Info |
Application |
Creating consolidated tar .. |
| Error |
Application |
Qkview create request failed with status %v \n |
| Info |
Application |
Completed POST Qkview request |
| Error |
Application |
DEBUG: this is non ideal and never should enter into this scenario as only one qkview job should be in progress at a given instant |
| Info |
Application |
error occured during the job details update in configmap %v |
| Info |
Application |
Updated the qkview details in configmap |
| Info |
Application |
deleting the qkview tar file for the job: %s |
| Info |
Application |
deleting the qkview tar file from path: %s |
| Info |
Application |
Error: qkview tar file deletion failed for the job: %s Error: %v |
| Info |
Application |
deleting the tar file for the qkview jobs |
| Info |
System |
Successfully initialized AMQP |
| Info |
System |
bind keys - %v |
| Info |
System |
exchange name - %s |
| Critical |
System |
error: failed to setup exchange |
| Info |
System |
exchange name = %s |
| Info |
System |
Creating CM20 Response: Response Type %s, entitlement %s, expiry %s, uuid %s, signKeyVer %s |
| Critical |
System |
Failed to publish the entitlement response to %s. Error: %s |
| Info |
System |
GetEntitlementRequest received with a pub key version different to that of latest private key with CWC. Signing with latest |
| Notice |
System |
ParseCM20ResponseMessage: Received Invalid request |
| Info |
System |
HandleCM20Response: Signed Version: %s, Version Stored Locally %s |
| Error |
System |
mismatch of request, response CM20 version reqV:%s respV:%s |
| Info |
System |
HandleCM20Event: Signed Version: %s, Version Stored Locally %s |
| Error |
System |
failed to create Public CM20 request, error %s |
| Error |
System |
Failed to publish message, error %s |
| Error |
System |
Failed to Create Event Payload for License Verification. %s |
| Info |
System |
Publishing event message to SPK Controllers. Event %s, entitlement %s, expiry %s, uuid %s |
| Error |
System |
Failed to publish the message. %s |
| Error |
System |
Failed to Parse Public key response msg rspMsg: %v. Error: %s |
| Error |
System |
Failed to Create Event Payload for Heartbeat. %s |
| Error |
System |
Error publishing heartbeat message. %s |
| Error |
System |
====> Published heartbeat message time:%v |
| Debug |
System |
CreateMessage: Message that is being marshalled msgType: %s, svcType %s, isSigned %v, dataType %s, signv %s |
| Info |
System |
ParseMessage unmarshall error : %s |
| Debug |
System |
ParseMessage: Message that is being unmarshalled input.gType: %s, svcType %s, isSigned %v, dataType %s, signv %s |
| Notice |
System |
Retreived latest public key version %s |
| Error |
System |
Failed to create Public key response msg rspMsg: %v. Error: %s |
| Error |
System |
Failed to parse the Public Key request to %s. Error: %s |
| Notice |
System |
Received Public Key request for version: %s |
| Info |
System |
Latest public key sent to: repyTo:%s |
| Error |
System |
Failed to publish the Public Key response to %s. Error: %s |
| Debug |
System |
CreatePubKeyResponseMessage key version:%s signVersion:%s |
| Debug |
System |
ParseAndVerifyPubKeyResponseMessage Output public Key:%s version:%s |
| Debug |
System |
ParsePubKeyResponseMessage Output public Key:%s version:%s |
| Info |
System |
HandlePubKeyResponse: Signed Version: %s, Version Stored Locally %s |
| Critical |
System |
mismatch of sign version, signv expected: %s, response received signed with public key version:%s |
| Error |
System |
Failed to parse the Public Key response. Error: %s |
| Error |
System |
Received invalid PubKey response message |
| Error |
System |
ResponsePubKeyLatestKey failed ParseRsaPublicKeyFromPemStr |
| Info |
System |
New Public Key version saved is %s |
| Debug |
System |
CreatePubKeyEventMessage key version:%s signVersion:%s |
| Debug |
System |
CreatePubKeyEventMessage for Public key version:%s |
| Info |
System |
Curr Public Key version saved is %s |
| Info |
System |
ParseAndVerifyPubKeyEventMessage key:%s version:%s |
| Info |
System |
ParsePubKeyEventMessage key:%s version:%s |
| Info |
System |
HandlePubKeyEvent: Signed Version: %s, Version Stored Locally %s |
| Critical |
System |
mismatch of sign version, signv expected: %s, event received signed with public key version:%s |
| Error |
System |
Failed to parse the Public Key event message. Error: %s |
| Critical |
System |
Received invalid PubKey Event message |
| Error |
System |
EventPubKeyLatestKey failed ParseRsaPublicKeyFromPemStr |
| Debug |
System |
sendLatestPublicKeyRequest :%s |
| Error |
System |
failed to create Public Key request , error %s |
| Error |
System |
failed to publish Public Key request, error %s |
| Info |
System |
name space %s and URL %s |
| Error |
System |
Failed to load client cert and key. Error %s |
| Error |
System |
Failed to read ca root cert. Error %s |
| Error |
System |
Failed to load client cer and key. Error %s |
| Error |
System |
Failed to establish connection to rabbitmq server. Error %s |
| Error |
System |
error: failed to open connection |
| Error |
System |
error: failed to declare exchange |
| Error |
System |
error: failed to declare queue |
| Info |
System |
Publishing to exchange %s with bindingKey %s |
| Debug |
System |
Key rotate timeout: %v |
| Error |
System |
Rotating Keypair - Parsing private key PEM failed |
| Debug |
System |
rotateAndNotifyPubKey version: %s |
| Error |
System |
Failed to Create Event Payload for Notifying Public Key. %s |
| Info |
System |
Publishing Public Key event message to SPK Controllers. Sign Version %s |
| Error |
System |
GetKeySignature: received private key as nil |
| Error |
System |
writing msgHash failed with error: %v |
| Error |
System |
SignPSS failed with error: %v |
| Error |
System |
VerifySignature: received public key as nil |
| Error |
System |
writing msgHash failed with error: %v |
| Error |
System |
VerifyPSS failed with error: %v |
| Error |
System |
recevied erro while parsing msg body :%s |
| Info |
System |
Received ServiceTypeCM20 Request message |
| Info |
System |
Received ServiceTypePubKey Request message |
| Info |
System |
Received ServiceTypeDebug Respons message |
| Error |
System |
Received Invalid Service type %s and Message type %s |
| Info |
System |
Successfully Created and Initialised AMQP |
| Error |
System |
Failed to create channel. Error %s |
| Error |
System |
Failed to consume the message, %s |
| Info |
System |
Connection to RabbitMQ lost { %s }, Reconnecting ... |
| Warning |
System |
Failed to acknowledge the message, dropped %s |
| Debug |
User |
%v handler called with method %v only POST is supported |
| Info |
User |
DEBUG: received params - %s |
| Info |
User |
Final command to run: %s |
| Info |
Application |
POST %v completed |
| Debug |
Application |
%v handler called with method %v only GET is supported |
| Debug |
User |
DEBUG: Please try the endpoint /debug/home for debug-api help... |
| Error |
Application |
Error getting jobdata. Msg: %v |
| Error |
User |
Error: job id does not exist: %v |
| Info |
User |
GET %v completed |
| Info |
User |
Unsupported command: %s |
| Debug |
User |
IPv4 Address: %s - Valid.\n |
| Debug |
User |
IPv4 Address: %s - Invalid. |
| Debug |
User |
IPv6 Address: %s - Valid. |
| Debug |
User |
IPv6 Address: %s - Invalid. |
| Debug |
User |
Tcpdump Params: %s - Valid. |
| Debug |
User |
Tcpdump Params: %s - Invalid. |
| Debug |
User |
Configview Params: %s - Valid. |
| Debug |
User |
Configview Params: %s - Invalid. |
| Debug |
User |
Lsndb Params: %s - Valid. |
| Debug |
User |
Lsndb Params: %s - Invalid. |
| Debug |
User |
Bdtcli Params: %s - Valid. |
| Debug |
User |
bdtcli Params: %s - Invalid. |
| Debug |
User |
Mrfdb Params: %s - Valid. |
| Debug |
User |
Mrfdb Params: %s - Invalid. |
| Info |
User |
%v handler is supported only in disconnected mode |
| Info |
User |
%v handler called with method %v only %v is supported |
| Info |
Application |
%v handler getting jobId from URI |
| Info |
User |
%v handler called with invalid parameter. %v |
| Error |
System |
%v Unable to get the file path %v ERROR: %v |
| Error |
System |
%v Unable to download the file at path: %v. ERROR: %v |
| Error |
Application |
Qkview job:%v is failed, ERROR: %v \n |
| Info |
User |
no job found with the filters %v \n |
| Error |
Application |
Qkview job deletion failed at jobQueue for job Id: %s \n ERROR: %s\n |
| Error |
System |
Qkview job deletion failed at configmap for job Id: %s \n Error: %s \n |
| Info |
User |
Qkview job not found with Id: %s \n |
| Error |
System |
Qkview tar file deletion failed for job Id: %s \n Error: %s \n |
| Info |
Application |
Qkview deletion completed for jobId %s \n |
| Info |
Application |
Qkview jobs deletion started |
| Error |
System |
Qkview job deletion failed at configmap for job Id: %s Error: %s |
| Error |
System |
Qkview jobs deletion is not successful from configmap. ERROR: %s |
| Info |
Application |
Qkview jobs deletion completed |
| Info |
User |
filters passed %v |
| Info |
User |
job %s for the filters %v |
| Info |
User |
no job found with the filters %v |
| Info |
Application |
Finding latest qkview job |
| Info |
User |
latest job details %v |
| Info |
System |
Starting mTLS Rest API Server on port 38081 |
| Critical |
System |
Rest API Server stopped with error: %v |
| Error |
Application |
Telemetry reports not equal on field name '%v:%v' (%v != %v) |
| Error |
Application |
Telemetry reports not equal on field name '%v' (%v != %v) |
| Error |
Application |
Telemetry reports not equal on field name '%v ReplicaCount:%v' (%v != %v) |
| Error |
Application |
Telemetry reports not equal on field name '%v ThreadCount:%v' (%v != %v) |
| Error |
Application |
ERROR: %v unmarshalling json |
| Error |
Application |
ERROR: %v unmarshalling CPU metric data in bytes |
| Error |
Application |
ERROR: %v marshalling CRD metric data to bytes |
| Error |
Application |
ERROR: %v unmarshalling CRD metric data in bytes |
| Error |
Application |
Error reading configmap. Error %s |
| Error |
Application |
ERROR: %v getting report |
| Error |
Application |
ERROR: %v updating config map from k8s |