6.5. Verify SSL Orchestrator Deployment Settings

In a purely programmatic sense, it is not required to log into the BIG-IP Central Manager GUI. However, you will use it in in this lab to provide visual feedback on successful API deployment.

6.5.1. Log into Central Manager (CM) GUI

Note

Skip this section if you are still logged into the BIG-IP CM GUI from the previous lab module.

1. Refer to section 3.1 of this Lab Guide to access and log into the BIG-IP CM GUI.
2. On the home screen, click the Manage Applications button.

6.5.2. Review the Application in BIG-IP CM

1. Navigate to the BIG-IP CM Security workspace.
2. In the SSL Orchestrator left menu, click on Inspection Services.
3. Verify that the my-sslo-tap inspection service was created and review its configuration.
4. In the SSL Orchestrator left menu, click on Service Chains.
5. Verify that the my-api-service-chain Service Chain was created and review its configuration.
6. In the SSL Orchestrator left menu, click on Policies.
7. Verify that the my-api-policy Traffic Policy was created and review its configuration.
8. Navigate to the BIG-IP CM Applications workspace.
9. In the Applications left menu, observe the applications that you created from the previous lab modules.
10. Verify that the my_app application was created and review its configuration.